3D Dynamic Led Cartoon Welcome Light for bicycle/car/ebike/motorcycle/kids scooter

How to install:Tear off the double sided tape from the back of the Led light and find a flat and vertical position on the motorcycle/electric vehicle with a flat position. Do not tear the glue as it will affect the viscosity How to charge: Press and hold the black triangle on the top of the projector, slide the back cover down, separate the machine, and the charging port is inside

How to boot:Long press the white triangle, then press the switch mode after powering on, there are five modes to switch

*How to use the sensor sticker: The sensor sticker is for automobiles. It is not necessary for non-automotive use. For car use, you can contact customer service. There are video tutorials

Note: The machine has light sensor and distance sensor, it will not light up during the day, it can be tested at night or in a dark place After charging for 1-2 hours, the blue light indicator will be off when fully charged. For normal bicycle, Pmd, scooter can be used for 3-5 days normally and it can last for about a month for cars. The specific time depends on the usage time and frequency. The machine has a waterproof design, but it is best to put it away in case of heavy rain