HamshMoc Flap Pet Door Silent Cat Door Extra Large Durable with Security Locking Automatically Close Easy Install Extra Large for Cat

CONTACT US immediately if you have any problem with our product before you LEFT A FEEDBACK, we will try our best to solve it！ >Product Specifications:- Pattern: Cat Flap Door- Color: White- Material: ABS Plastic + PC Plastic- Suitable for: Cats- Product Size: 23.5 27.5 * 5cm- Packaging: 1Cat Flap Door Inside >Product Highlights:-【Free YourHands】: Easy access to the house for your pet,no more repeatedly opening doors for it.-【Magnetic Design】: The double magnetic suction design is effective in holding the inner pages after the pet has left and has an automatic window closing function.-【Rotatable Door】: Inserts can be rotated the tether post,more solid and durable.-【Silent Brushes】: Effective noise reduction,reduce the noise generated when the pet goes in and out.-【4 Ways To Close】:1.Only in and not out.2.Only go out but not in.3.Fully open.4.Fully closed.- 【Further details】:--Screw holes designed to hold the door more effectively using screws.--Inner frame contains an inner return ring, which is less likely to scratch.- 【Product use instructions】:Step 1: Trace the shape of the door frame on the cardboard and cut it out.Step 2: Place the cut out paper on the door and draw the shape of the pet door along the paper.Step 3: Drill holes in all the corners of the door shape using an electric drill.Step 4: Use the chainsaw to cut tunnels out of the door shape.Step 5: There are 2 cuttable lines in the door frame which can be cut with a cutter depending on the depth of the existing door opening. Approx. 2-4 cm cutting range.Step 6: After the door tunnel has been cut, if the excised tunnel is large, it can be bedded with wood veneer to act as a seal.Step 7: Use double-sided tape to attach the pet door to the door. There are eight screws, use a screwdriver to tighten and secure the door from both sides.Step 8: Press the nuts onto all the screw holes, installation is complete. >Notes:1.The pet door itself does not include a screen, which needs to be cut from your own screen door and placed inside.2.It is recommended to use a flathead screwdriver or a putty knife, etc. when disassembling the door frame.3.Be careful not to pinch your fingers during disassembly and it is recommended for 2 people to operate the installation.4.When separating the door inner sheet, be careful of the snap lock. If it falls out, it needs to be reinstalled.5.Screws and nuts are provided, pay attention to matching them during installation.6.After installation, gently push the inner sheet by hand to check if the door is working properly. >Warm Tips:-If you have any problem when you received our products,contact us immediately before you leave a feedback,we always try our best to solve you issue.