Rayhong Multi-purpose Car Anti-rust Paste Rust Iron Protection Repair And Maintenance Car Removal Metal Car Anti-Rust Chassis Rust Converter Water-Based Primer Metal Surface Rust Remover Weather-Proof Long Lasting Deruster Car Anti-rust Primer 120ML

Does your car chassis have rust problems?The rusty chassis became unrecognizable. The easiest to use and fastest drying speed anti-rust converter is the chassis anti-rust converter! The chassis rust inhibitor removes existing rust and converts it into an inert coating, sealing moisture and preventing future rust and corrosion.No more scraping, sandblasting or sanding! This all-in-one surface conditioner and primer can form a black protective polymer barrier, weatherproof, and ready to apply a new layer of paint to your car chassis. This chassis anti-rust converter will provide more than twice the anti-rust protection.Features:Transform existing rust: The chassis rust converter transforms and replaces the existing rust with a black protective polymer barrier.Protect iron and metal surfaces: It can restore and protect iron and metal surfaces on cars, trash cans, equipment, railings, etc.Prevent future corrosion: This anti-rust treatment prevents future corrosion by preventing moisture in rain and snow. Dry after 20 minutes.Non-toxic, smoke-free formula: It is a non-flammable, low-VOC water-based treatment agent. It is non-toxic and does not emit harmful fumes.direction:Surface treatment: Use wire brush or sandpaper to remove large rust and scale particles. Clean the surface thoroughly to remove dirt, dust and grease.Application: Shake well or stir well before use. Use a brush, roller or pump sprayer to apply two coats with at least 20 minutes of drying time between the two coats. Allow 48 hours of curing time before applying high-quality paint.Cleanup: The application equipment should be cleaned immediately with soap and water.General: Do not use this product if the surface temperature is below 50°F. Store in a cool, dry place to prevent freezing or temperatures exceeding 100°F. In order to protect the iron surface for a long time, the cured rust inhibitor coating should be sealed with two layers of high-quality oil-based paint. No other primer is needed.