M.2 NGFF SSD MSATA Protocol To Serial Port External Built-In Hard Disk Box Msata To Sata 3 3.0 Dual Disk Switching With Switch

M. 2 (NGFF) and MSATA 2-in-1 SATA 3 hard disk enclosureBe careful:Two SSDs can be inserted at the same time for use. Only one SSD can be identified at a time. You need to turn the switch to the corresponding positionFor M.2 NGFF, this adapter card is only applicable to B-key or B/M-key interfaces, not M.2 NVMe M-key interfaces. Hard disk usage that Does not support AHCI and NVME protocolsOnly M2 NGFF Hard Disk Supporting SATA protocol (NGFF)1. Support M 2 NGFF or MSATA SSD is converted to SATA2.5 "/3.5" hard disk for use2. Fully compatible with SATA3.1 standard3. Compatible with PCI Express M.2 protocol4. NGFF and MSATA SSDs are allowed to input 3.3V voltage and 3A maximum current. This adapter card has no chip, and there is no speed. The speed that only functions as a transfer is related to the SSD itself5. Support 80mm 60mm 42mm 30mm M 2 NGFF SSD6. Support full height and half height MSATA SSDsSwitch toggle designMove the NGFF mode switch upwardMSATA mode switch toggles downwardBefore purchasing, please make sure to confirm that your SSD type is NVMe. M.2 distinguishes between NGFF and NVMe, as they are different.AAA--------------------------------------------------------------------------------------------------------------------------------------------M. 2 Interface confirmation, left notch B key 6Pin, does not support right notch M key 5Pin