🇸🇬𝟭𝟱𝗺 Mini Car Garden Water Hose Reel Set with 𝟠-𝕡𝕒𝕥𝕥𝕖𝕣𝕟 Multi-function Sprayer for Gardening/HDB MSCP Car/Bike/Van Wash

MSCP: Multi-Storey Car Park🟧𝔽𝕖𝕒𝕥𝕦𝕣𝕖𝕤✅ Compact and portable design with ergonomic carry handle, can be stowed away in the car boot✅ 8 Patterns sprayer: suitable for🌱gardening, house cleaning and car wash✅ Sturdy and durable hose✅ Hose holders allow the inlet hose and outlet hose to be held in place neatly✅ Comes with two mounting holes for wall mounting✅ Quick-connect sprayer with 8 spray patterns; valve function controls water flow for watering of delicate young seedlings plants✅ Additional HDB MSCP tap adaptors for direct connection to the tap: just 20cents and save you so much time (screw thread types)🟧Connection guide:https://www.facebook.com/225515818331322/posts/586763672206533/🟧𝕊𝕡𝕖𝕔𝕚𝕗𝕚𝕔𝕒𝕥𝕚𝕠𝕟Colours:◼blue/light greyDimensions: 26cm x 15cm x 30cmWeight: 1.9 kgMaterial: ABS+PVC+PPUseable length: approximately 15m (inlet hose + outlet hose)Water hose: inner diameter 9mm, outer diameter 12mm 🟧Package includes:1x Garden hose setTap adaptors (suitable for HDB MSCP Washing bay & common showerhead/bidet hose tap)💧If you would like to connect to sink tap or other non-standard home tap, please share a close-up photo of your tap so that we can advise. Most likely a separate tap adaptor is required.𝕀𝕟𝕤𝕥𝕣𝕦𝕔𝕥𝕚𝕠𝕟𝕤1. Identify your tap. The compatible taps are as shown in the picture.🔹If your tap is screw thread type, screw on the adaptor and align well with the screw threads. If the adaptor is slanted, it is difficult to screw on fully and there can be leaking.🔹If there are no screw threads, use the clamp type.2. Unwind the inlet hose and connect to the tap adaptor. 𝗗𝗢 𝗡𝗢𝗧 𝗢𝗡 𝗧𝗔𝗣 𝗬𝗘𝗧 𝗘𝗟𝗦𝗘 𝗧𝗛𝗘 𝗛𝗢𝗦𝗘 𝗪𝗜𝗟𝗟 𝗕𝗘 𝗦𝗧𝗜𝗙𝗙 𝗪𝗜𝗧𝗛 𝗪𝗔𝗧𝗘𝗥 𝗔𝗡𝗗 𝗗𝗜𝗙𝗙𝗜𝗖𝗨𝗟𝗧 𝗧𝗢 𝗣𝗨𝗟𝗟 𝗢𝗨𝗧3. Unwind the outlet hose and pull out the entire hose length fully. Otherwise water pressure will be reduced if the hose remains coiled inside hose reel.4. Connect spray gun to outlet hose. Turn the knob on the spray gun for the desired spray pattern. Finally turn on the tap to spray.5. After use, to keep the hose:🔴Pull down the spring loaded connector when disconnecting from the tap adaptor. Do not pull out the hose connector by force as this will damage the hose connector.🔴Disconnect spray gun and drain out the water, else the hose will be filled with water and becomes very stiff. This makes it very difficult to wind back the hose.🔹Wind back inlet hose and avoid twisting the hose.🔹Wind back outlet hose 𝗘𝗩𝗘𝗡𝗟𝗬 by turning in 𝗢𝗡𝗘 𝗗𝗜𝗥𝗘𝗖𝗧𝗜𝗢𝗡 𝗢𝗡𝗟𝗬 else 𝗛𝗢𝗦𝗘 𝗖𝗔𝗡 𝗣𝗜𝗟𝗘 𝗨𝗣 𝗔𝗡𝗗 𝗝𝗔𝗠 𝗜𝗡𝗦𝗜𝗗𝗘 𝗖𝗔𝗦𝗜𝗡𝗚. You can see the hose from bottom opening. If not wound back evenly, hose reel can be jammed and it becomes more difficult to wind back.