150g Vertical Crusher Wall Breaking Powder Machine Dry Grinding Seasoning Grinder Powder Grinding Machine Shredder Disintegrator For Grains Miscellaneous Grains Herbs

150g Electric High-Speed Herb Seasoning Feed Mill Grains Grinder Powder MachineFeatures:1. Product function: Crush grains, traditional Chinese medicine, rice paste, beauty ingredients, feed and minerals, etc.2. Scope of use: Home, Traditional Chinese Medicine Room, Shopping Mall, Shop, Health Club, Laboratory, etc.3. Crushing materials: Sanqi, Maka, ass hide glue, rock sugar, rice, red beans. Peanuts, walnuts, sesame, yams, etc.4. Regarding fineness: The fineness is controlled by machine polishing time, with a theoretical value of around 300 mesh, which may vary depending on the ingredients used.5. Working hours: The crusher operates at an ultra-high speed and generally lasts for no more than 5 minutes, with an interval of 5 minutes for cooling.Rated power: 700WFunction: Crushing medicinal herbsMaterial: 430 stainless steelWorking time: 5 minutesInterval time: 5 minutesCrushing degree: 50-300 meshMotor speed: 2800R/minWeight: 2.4kgGrinding capacity: 15-150gUse Tips:Please turn off the power switches before use this machine1.Open the upper cover( clockwise close, and counterclockwise open).2.Put the dry herb into the crushing box.3.Tighten the upper cover.4.Plug in and open timer switch.5.When you hear the voice of uniform rolling, that is say the herb has been grinded into powder.6.Open the cover and pour out the powder.Attention:1.Please pre-dry and small quantity and short time when grind sesame(with oily) and ice-sugar(with viscosity), you can grinder for more times to avoid the machine to hot.2.Don't wash the machine with water, you can clean the machine by cloth or brush. Moist products(meat and fruit) and excess quantity products is forbid.3.Don't let the material exceed half of the box.4.Normal material only need 0.5-2 minutes.5.This machine can not running for long time, the maximum time is no long than 5 minutes. If need grind bulk material, please run the machine interval.6.Don't open the power switch when the cover is open.7.After long time use, you should check the carbon brush and blade, if wear out, please change.8.Please check the screw of blade is tighten.