AITHEA Rechargeable LED Motion Sensor Night Light Under Cabinet Cordless Lamp for Kitchen Wardrobe Bedside Strip Bar Light

Features:1. The light source is LED, the length is different, and the quantity of led bead is different;2. The install method is magnetic suction type. Tear off the adhesive on the back of the iron sheet and stick it on the wall or cabinet, and stick magnet strip onto the back of the lamp. The induction lamp can be sucked with the magnet and iron sheet.Specification:Name: Long Strip Induction Night LightLength: 10cm，20cm，30cm，50cmLighting Color: Cool White(6500-8000K)/Warm White(2800-3500K)/3 Color in 1 Lamp(Cool White/Nature White/Warm White in 1 Lamp)Voltage: DC 5VSensing Angle: 120Sensing Range: 0-5 metersFunction introduction:1. The single color lampPress the switch for the first time: always on mode;Press the switch for the second time: night sensing mode;Press the switch for the third time: all day sensing mode;Press the switch for the fourth time: OFF;Press the switch all the time: adjust the brightness2. The lamp 3 color in 1 lamp(NOTE: the induction function only work in the dark)Short press the first, the lamp will be on, and the lighting color is cool white. The mode is induction, and in this mode long press about 2s,the lamp will flash twice, then will be into always on mode, the lighting color will not change. Short press again, the lamp will turn off.When the lamp is in the induction mode, short press the switch, the lamp will change the lighting color.Product Show