5Pcs ACF Film 10.1 Inch 278x190x0.3mm for ANYCUBIC Photon Mono M5s M5 Pro M7 Pro M5 M7 UV Resin 3D Printers ACF Release Films

Be CarefulPlease Note!!! When the protector is at an angle, the release film will cause cracks because of the angle.ACF film is elastic and curly, we recommend using tape to stick the ACF film on the table for easy tearing.Attention :Please pay attention to the front and back sides, otherwise the resin may stick to the ACF Film. Smooth side contacts the resin, Rough surface facing the UV light source.Product DescriptionSize: 278x190mm ( 10.94x7.48 Inches ) ;Thickness: 0.3mmThe light tranamittance is 95%High Speed ACF FilmApplicable Models For UV Resin 3D Printers· ANYCUBIC Series:Photon Mono M5s Pro, M5s, M5, Photon Mono M7 Pro, M7, Photon Mono X 6Ks, Mono X 6K, Photon M3 Plus, Photon Mono X, Photon Mono X2· ELEGOO Series: Saturn 3 Ultra, Saturn 4 Ultra，Saturn 2, Saturn 3, Saturn 4, Saturn, Saturn S, Mars 4 Max· Phrozen Series: Sonic Mini 8K S, Sonic Mini 8K, Sonic 4K 2022, Sonic mini 4K, Sonic 4K, Shuffle 4K, Sonic mini, Sonic, Shuffle Lite, Shuffle 2019, Shuffle 2018, Phrozen MakeHigh Speed ACF Film1.Release force:ACF2.Resin compatibility:ACF>nFEP>FEP3.Printing Speed: ACF>nFEP>FEP4.Print Success Rate: ACF>nFEP>FEPMore than 95% High TransmittanceIt has good non-viscosity, heat resistance, excellent ductility up to 300% and good flexibility can be bent 10,000 times which make your model printing perfectly.Stable Release Force DurableUniform coating, stable release force, good release effect for most resins; The surface is flat and free of defects such as wrinkles, scratches and bubbles. Meet the release requirements of various products and can be reusedGood Flexibility Excellent DuctilityExcellent ductility, elongation rate of 300%, good flexibility, bending 10000 timesBe CarefulPlease Note!!! When the protector is at an angle, the release film will cause cracks because of the angle.ACF film is elastic and curly, we recommend using tape to stick the ACF film on the table for easy tearing.Please peel off protection film on the FEP release liner film