Auto Body Dent Puller Kit Auto Paintless Dent Repair Kit with Bridge Puller Car Dent Removal Kit Powerfully Pops Car Dents

Feature:It is much cheaper than a body repair shop because it does not have high paint materials and labor costs.Save more time, no need to wait for car dent repair in repair shop.The operation is simple, most of the dent removal can be completed within half an hour.No need to disassemble the car.This tool is not only used to remove car dents, but can also be used for DIY home repairs.Steps for usage:Step 1. Clean the depressed surface.Step 2. Glue rods into the high-performance glue gun, and then plug the electric heating, a few minutes after the plastic rods will drop the glue,glue gun working temperature of about 165 to 200 degrees, the use of high temperature glue gun,pay special attention to safety and away from children.Step 3. Depending on your body sheet metal recesses select the size of the applicable gasket, and apply the size of the gasket at once to determine your size.Step 4. Use a heated glue gun to squeeze the glue stick evenly onto the surface of the gasket and place it gently in the depression and wait for 3 minutes. Note: slightly placed in the depression can not be pressure, after the use of gasket can reused after cleaning,Step 5. Using a balanced bridge, the operation must be adjusted slowly according to the size of your depression adjustment operation until the depression is completely flattenedStep 6. Spray the gelling agent on the gasket with the super-cure adhesive and remove the residual super-cure glue slightly with the film.Step 7. Wipe clean the surface, almost impossible to see after repairPlease note that there are three different color specifications when purchasing. A-Style (EU Plug) includes a glue gun kit, while B-Style (No Glue) and C-Style (No Glue) only have dent repair tools and do not have glue guns