Quick Heating Copper Water Faucet Repair Parts 13mm Socket Wrench Electric Hot Water Faucet Heating Tube Removal Tool Set

Factory Direct Sales electric faucet and full set all accessories are available in our shop.

If you don't know how to replace it after purchase, you can ask the customer service for the reference video of replacing the heating pipe.

Self-produced and sold, welcome to wholesale

more than 6,000 sets have been sold since it was listed for 6 years, which solves the problem of replacing heating pipes in personal and home appliance maintenance departments.

Electric heating faucet replacement heating pipe reference video http://v.youku.com/v_show/id_XMjg0NjE0OTcy.html? spm=a2h0j.8191423.module_basic_relation.5~5! 2~5~5! 10~5~5~A

This product is made of high-quality steel through lathe grinding, which is stronger than directly processed with galvanized pipe!!! Galvanized pipe processing tools are easy to slide after a few times, and the hardness is not enough! Many customers have reflected it. I hope you can see it clearly.).

Hardware tools, welding, there may be dozens of wire tolerance. Tolerance allowed by the state. If you refuse to return the product as an excuse for defects, please consider carefully if you mind!!!!

Warm Reminder: 13.15MM2 sleeves are required to replace the heating pipe, because there are 3 screws and 2 specifications for the heating pipe. The following figure shows the usage diagram of the three tools.

Buy 13MM 15MM sleeve for a single order is 20 yuan/piece

the width of the two teeth of the 13mm15mm sleeve is 3.5mm, and the depth is 32mm and 27mm respectively. The price of a water pressure switch tool is 23 yuan (the center point is 22mm or 14mm diagonally).

1. Heating pipe nut sleeve outer diameter 15MM inner diameter 13MM (single is 20 yuan)

2. Heating tube nut sleeve outer diameter 13MM inner diameter 10MM (single is 20 yuan)

3. The outer diameter of the special sleeve for water pressure switch is 28MM (23 yuan for a single piece, and the distance between two diagonal center points is 22MM)

4. Dedicated nut with M3 nut sleeve size of 5.5mm on the top of heating pipe (12 yuan for each).

5. Digital display the outer diameter of the special sleeve for hydraulic switch is 18MM (23 yuan for a single piece, and the distance between the two diagonal center points is 14MM)

Warm Reminder: there may be differences between each batch and the physical picture. Please be careful if you mind.