GTI2 GTI4 DEA Garage Door Remote Control Compatible With DEA GT2 GT4 MIO TR2 TR4 MIO TR2N TR4N GOLD 288 289 GTI2M GTI4M

DEA GTI2 GTI4 Garage Remote Control 433.92MHzDescription:1. Name: DEA remote control.2. Type of programming：Programming with the receiver3. Frequency: 433MHz, 433.92MHz4. Code: DEA rolling code and Fixed code.5. Number of channels: 2 or 4.6. Battery：Include BatteryCompatible WithDEA GTI2DEA GTI4DEA 433.92MHz Rolling CodeDEA GT2,GT4DEA MIO TR2,TR4DEA MIO TR2N,TR4NDEA GENIE 273,GENIE 273LDEA GOLD 288,GOLD 289DEA 433.92MHz Fixed CodeDEA 433-1, 433-2, 433-4DEA MIO TD2, MIO TD4DEA punto-2, punto-4DEA GT2M, GT4MHow is it programmed?When a button is pressed, the control-transmits the radio signal and tums on the LED thatindicates, in addition to the type of code used HCS rolling code-red LED(factory setting)DIP SWITCH HT12-green LED;D.A.R.T.DEA Advanced Rolling Transmission-alternating red/green LEDChange transmission codeHold down keys T1 and T2. When the radio control LEDS tum on(10s),wait until theyflash to indicate the type of code set:.1 flash per second=HCS rolling code2 flashes per second =DIP SWITCH HT123 flashes per second= D.A.R.T.Hold down Ti and use T2 . to change the type of flash. Once the new code has beenselected, press and hold down key T2 until the LEDs tum off (5s)Programming with receiver(Refer to the receiver manual for informationon the storage procedure.)1. Open the gate opener and find the programming buttonbriefly, an LED will light up on the receiver P.C.B., you nowhave 10 seconds to perform the next stepInclude* Remote control (with batteries)* User's manual* Key chain