Sealant Fix No Drill Glue Super Glue No Nail Glue Bathroom Furniture Hardware Strong Adhesive Superglue

Color: whiteSpecification: 12g, 40gDensity: 1g/cm³Tensile strength: 3MPaShear strength: 3.4MPaCuring time: 48-72h✅Product features:1.Waterproof and high temperature resistant, strong adhesive force, has a good sealing, use more assured.2.Multiple uses, can be used for plastic, tile, metal, marble and other materials bonding3.Convenient installation, no need to punch holes, has been cleaned.✅Packing list:1* glue--------------------------------------✅Frequently Asked Questions✅1. How long does it take to fully cure? (Why can't it be applied to a large area?)Standard curing calculation:Strike a strip of adhesive on the desktop, curing 0.8mm in depth per hour. Acting onBetween the product and the wall 0.5mm depth cure per hour. No-nail adhesive needs to be in contact with air to react and cure.The individual dots/strips allow the adhesive to be exposed to air over a larger area. This speeds up the curing time and improvesCuring time, improve curing efficiency.✅2. Isn't it quick-drying type? Why does it take 48-72 hours to set?The standard of quick drying is used for comparison with the same type of product. The curing of silicone adhesive circulating in the market is about 2MM perThe curing time of silicone adhesive circulating in the market is about 2MM per day, and the curing time of elastomer is about 7 days. And I MS adhesive role in the case of sealing construction, theCuring time needs 72 hours; role in the hardware pendant and other non-perforated installation only needs 48 hours.MS glue belongs to the paste glue, can not be compared with 502 and other liquid glue.✅3. How to disassemble the glue after curing?1, with a hair dryer to heat the bonding parts, insert a knife into the gap between the product and the wall, a little bit ofScrape down.2、Prepare a hammer and a screwdriver. Thin the screwdriver, insert it into the gap between the product and the wall andHammer slowly. The operation is slow and steady, the process needs patience.✅4. Can I paste white plaster walls, latex paint walls, wallpaper cover walls?For these walls, you can use no-nail adhesive. But the effect will be greatly weakened, not recommended to paste!Need to fold and load-bearing things; load-bearing then there will be a layer of the wall pulled off. It is recommended to paste some photoFrames, murals and other items that do not need to move often.✅5. Is there any requirement for the environment? Can it be used outdoors or on concrete walls?The molecular structure of MS adhesive determines its good weather resistance, long-term exposure to the outdoors can still maintain good elasticity.Good elasticity. The gel will not produce bubbles and cracks, and the strength is long-lasting, with good thixotropyIt has good thixotropy and extrudability. Adapt to outdoor, indoor, humid, low temperature and other operating environments. For rough surfacesurface, need to increase the glue to fill the pit injection.✅6. What should be paid special attention to in the process of using?1, the glue can not be too much, it is recommended to spot, strip glue, enough can be used.2, try to use the auxiliary way of bonding. The first few hours of the glue is basically no adhesive force, need toUse auxiliary fixed way to ensure that the object does not fall off and move position.