Dental Orthodontic Adhesive for Bracket Brace Teeth Light Curing Bonding Blue/Green Glue Self Cure Resin Gel Direct System

Warning: The primer and orthoadhesive contain acrylate monomers. Acrylate monomers are known to cause allergic reactions in sensitive individuals. They may cause skin and eye irritation.Precautions: Avoid eye and skin contact. Wear gloves when handling this material.Caution: Follow the manufacturer's instructions regarding handling, proper use, and eye protection recommendations when using a curing light.This system is designed for use at room temperature (20-25°C, 68-77°F). Store between 2-27°C (35-80°F) and protect from light exposure.Auto Cura① Preparation: Clean the enamel surface of the tooth, remove any contamination, then rinse, isolate, and dry the tooth.② Etching: Etch the enamel with acid for 50 to 60 seconds. Rinse and dry with clean air. If the enamel does not have a frosty appearance, please repeat the process.③ Priming: Apply a thin layer of primer to the etched enamel using a brush.④ Bonding: Apply another thin layer of adhesive to seal the edges. Position the bracket within 20 seconds, apply pressure for 5 to 10 seconds, and remove any excess primer. After 40 to 60 seconds, proceed with orthodontic procedures, followed by 5-minute curing.Cola azulThis orthodontic adhesive provides a longer working time and fast setting time. It can be applied directly to bands. Excess flash is easy to clean before light curing, and the cement is easy to see due to its blue color.It contains fluoride to reduce the chance of demineralization.Cola verdeThe paste is green at 29-32°C (84-90°F) and becomes clear at 30-33°C (86-91°F). It is easy for clinicians to clean off the extra flash. The color disappears in the mouth but can turn green again when the temperature drops with cold water or air, making it convenient to use and reducing chair time.