USA VISIONS Glass Pot Crystal Color Transparent Pot Heat resistant High temperature resistant High appearance Exquisite Soup Pot Original Genuine Imported

Brand: VISIONS/Corning Shipping location: Guangdong Province Material type: high borosilicate glass Applicable stoves: gas stoves, electric ceramic stoves, stoves Style: American Applicable scenarios: household and commercial use Scope of application: Used on the stove ✅ Can use microwave oven ✅ Used in the oven ✅ Electric ceramic furnace * infrared furnace ✅ Storage in refrigerator/freezer ✅ Dishwasher is suitable for ✅

👉 The materials and applicable scope of the crystal diamond pot and crystal color pot are the same, because the temperature during the production process is different, resulting in different colors of the glass, while others are completely the same. 👉 Origin of Crystal Diamond Pot Series: The pot body is produced in Japan, and the lid is produced in China; 👉 Origin of Crystal Color Pot Series: The pot body is produced in France, and the lid is produced in China;

🚩 Using aerospace glass material, it can withstand extremely large temperature differences (the temperature difference of the pot body can reach plus or minus 500 ℃, and the pot lid can reach plus or minus 120 ℃)

🔻frequently asked questions：

🎈Q: Can the lid of the pot be burned on fire?

Please avoid turning the heat too high and causing it to reach the lid of the pot. The lid should not be heated directly. Do not enter the oven or microwave. Do not use a damp cloth to retrieve the glass lid, and do not leave the hot lid in a cold or damp place for a long time.

🎈Q: How to clean the pot?

Do not use metal spoons or steel wire balls to avoid scratching the glass surface. Please use a white cleaning cloth to clean.

🎈Q: Why is there a gap between the lid and the body of the pot?

Due to the inability to open air holes on the glass cover, this pot cover is designed with a raised point overhead exhaust system, leaving a vent groove between the pot cover and the pot body to allow steam to escape when boiling. Therefore, the pot cover and pot body are not airtight and may have gaps that are not completely sealed.

🎈Q: Color difference of Corning pot lid:

Due to differences in origin and material, the pot body and lid may have color differences in special environments and lighting angles.

👉Special note:

The two wires on the top of the pot are not cracks, but fusion lines that cannot be avoided in terms of process and do not affect their use and lifespan;

2. Bubbles are inevitable during the production process and are a normal phenomenon that does not affect normal use and lifespan;

3. Leaving an air groove between the lid and the body of the pot can effectively prevent hot air from bursting open the lid. This is a design requirement and not a quality issue;

4. Flow patterns are generated during the production process and are unavoidable, not a quality issue;

5. The bonding line is a line from liquid to solid, not a crack, and will not affect the service life;

6. The logo is attached to the pot body by static electricity, and there is a small pr