JEYI | JEYI Cooling Warship Dust-proof Heatsink for M.2 2280 NVME NGFF Aluminum Thermal Cooler with Thermal Conductivity Silicon Wafer

Product Description50 times larger surface area than traditional heatsinks, allowing for better heat dissipation performanceAfter the product is installed on the motherboard, the width is 23.5mm/1”, the height is about 32mm/1.3”, under normal situations will not affect the use of CPU heatsinks or graphics cards, but please pay attention to whether your motherboard has enough space to install this heat sinkThe heat sink has a screw-fixed frame and included two high-conductivity thermal compound pads that can fill the contact gap of the SSD. When the screws are tightened, the heat dissipation of the SSD will be faster, and the soft thermal compound pads can make the solid heat sink base gently touches the SSD without damaging itSupport all types of M.2 SSD ( NVME SSD and NGFF SATA SSD ). Tightening the screws and stick the thermal pad on the chips and the back, it will works, especially for the Samsung 980 EVO series which is really hot. According to JEYI's experiment, it can be reduced At least 10°C-30°CCome with free thermal pads and screw driverJEYI M.2 HeatSink, Aluminum Passive Heat Sinks with Fins - Shark Gills FinsCold iGlacier8Better Heat Dissipation CapabilityFlat contact surface, so that the core of heat generation through the cooling pad better access to the heat sink, to enhance the cooling capacityEasy to installPERFECT FIT FOR MULTIPLE MOTHERBOARDThis heatsink will not affect the use of CPU heatsinks or graphics cardsThe height is about 32mm/1.3"The aluminum thermal conductivity is 203W/mkMore fins and a whole piece of aluminum1.50 times larger surface area than traditional heatsinks, allowing for better heat dissipation performance2. CNC cut from a single piece of aluminum with no additional seams for faster heat transferSteps to Install the Heatsink1. Loosen the screws to remove the heat sink base2. Apply thermal compound pad to the heat-emitting core3. Fix the fins on the baseFeatures:Designed for desktop computers.Aluminum body, Anodic Oxidation Surface Treatment.Aluminum alloy-Groove design, greatly increase the heat dissipation area, with 10°C - 30°C cooling effect.Compatible with Sing/Double sided M.2 2280 SSDs.Easy to install, and not damage the hard disk.Supports all M.2 SSD, such as Samsung 970 EVO/950Pro/960EVO/XP941/PM951/PM961/SM951/SM961, Intel SSD6/7 Plextor M6e Series, Kingston HyperX Predator M.2 SSD and so on.