🇸🇬[READY STOCK] Wireless Video Doorbell Camera 2-Way Intercom System with 4.3inch Monitor IPX65 Waterproof Night Vision 170° Viewing AngleHome Security No APP No WiFi

【Easy to Install & Work】Installing the wireless doorbell camera no subscription is hassle-free. Just connect the doorbell camera with monitor via 2.4G Bluetooth. NO monthly fee, NO WiFi or APP required. You can use the included 3M adhesive or screws to mount the doorbell where you want it.【One Key Monitoring】Regardless of whether there is human motion, you can see the scene at the door at any time by pressing and holding the dial key for 2 seconds. It prevents the doorbell and monitor from being activated incorrectly and extends the battery life of the doorbell.【Two-Way Intercom】When visitors press the button on the doorbell, you can watch and communicate with your visitors at your door. Presses and hold the dial key on monitor to speak, then release it to receive the audio from your visitor. It is similar to how a walkie-talkie works.【HD 1080P Video & Night Vision】Our camera doorbell wireless no subscription boasts a high-definition 8MP resolution and 160° wide-angle lens. There's infrared night vision that allows you to see clearly who is knocking the door even at night.【Rechargeable Battery】This wireless video doorbell is powered by rechargeable 1800mAh Li-ion battery with 2 months of working time, and recharged 3-4 hours to full. Please note that the monitor needs to be recharged with 5V/1A charger(not included)How to install:1.Please pair the doorbell with the monitor.2.Please test the signal between those locations you want to place the doorbell and the monitor.The range of signal is 16.4ft-164ft on open air. The range of signal is 16ft-66ft if there are obstacles(door, wall, window and so on).3.Please install the doorbell on the door via 3M self-adhesive tape or screws. It is recommended to install the upper end of the door handle if it is iron door. And 5ft far away the ground.4.Please install the monitor in the place you want, the monitor need to be charged by 5V charger(not included) and USB cable.How to work 2-way audio:1.If ring the doorbell, the doorbell will connect with monitor, then press the dial key to start the 2-way audio.2.The doorbell requires no action. Presses and hold the dial key to speak, release it to send your audio and receive the audio from your visitor. It is similar to how a walkie-talkie works.3.If no need to talk, press the dial key again to turn off 2-way audio.Please Note:1.The wall, window, metal door and so on, they will weaken the signal, please test and install the doorbell in a place with good signal.2.It isn't motion activated. If no one presses the doorbell, it enters the standby mode, and the monitor can activate the doorbell camera.3.The doorbell camera automatically capture and record a video for 20-25 second when ring the doorbell(with a TF card inserted).4.There is the echo if the monitor is too close to the doorbell, please move them away or lower the volume.