（Android only）Split Sibionics GS1-P2 42 Days Realtime Dynamic Blood Sugar Meter Noninvasive Glucose Monitoring Freestyle Libre Sensor Only for Android

This application can switch to your local language with each user's country and region（Android only）（Android only）（Android only）Split Sibionics GS1-P2 24h Realtime Dynamic Blood Sugar Meter Noninvasive Glucose Monitoring Freestyle Libre Sensor Only for AndroidBlood glucose unit: mmol/L mg/dLDetail description*The Split Sibionics GS1-P2 requires that the transmitter be attached to the arm and then assembled with the probe. It adopts a split design - including a disposable probe and a reusable transmitter. The transmitter part can be reused for 18 months, and the probe can continuously monitor for 14 days. That is to say, when you replace the sensor, you don't need to replace the transmitter simultaneously, which can greatly reduce the usage cost, reduce waste at the same time, and is economical and environmentally friendly.*The Split Sibionics GS1-P2 ynamic continuous glucose detection system has the advantages of real-time Bluetooth transmission, 14 days X24 hours continuous monitoring, no calibration, high and low blood sugar reminder, IP28 level dust and water resistance. It is composed of sensor component package, silicon based self-developed chip and so on. The mard value was 8.83%, and the measured results were basically consistent with those of finger blood. Simple installation, painless wear, safe and comfortable.Blood glucose unit: mmol/L mg/dLAfter receiving the goods, you can install them according to the detailed steps. You can also contact me , as incorrect installation steps may cause the sensor to fail to connect.*When you shower, exercise, and swim, it is recommended to apply the reinforcement sticker (included in the box). Prevent the sensor from loosening resulting in the inability to connect.