All Metal Pocket Hole Jig Kit with Quick Clamp and Step Drill Bits Easy Use 2 Holes Pocket Hole Screw Jig System MD30

All Metal Pocket Hole Jig Kit with Quick Clamp and Step Drill Bits Easy Use 2 Holes Pocket Hole Screw Jig System MD30ParameterNameQuick clamp Pocket Hole jigBrandYOMOModelMD30Materail:Aluminum alloy (body)Angle of oblique hole15 degreesSuitable board thickness8-30mmPacking size26012050mmWeight0.585kgAdd two chip removal port for smoother drillingUpgrade quick clamp Bottom pressure rod with slotted screws for easy lifting and lowering1. Measure the thickness of the board (if itis 30mm thickness),Adjust the pointer of thebaffle to position 30 and tighten the screw; 2. Two methods for adjusting the depth ofthe drill bit, tighten the screw after adjustingthe position of the limit ring;3. Tighten the baffle against the edge of the board,rotate the rubber block, and adjust the height,tighten the nut and tighten the blue handle tightly; 4. After fixing the drill bit,the electric drill can start drilling; 5. Tighten the screws and block the hole with a plug.