High Pressure Pump with Governor 1/2" Ceramic Pump 3000L/H 8M Head DC 12V 24V Submersible Brushless Pump with EU Adapter

If the water pump is not equipped with a transformer, it cannot directly use 220V AC voltage!If the 220V AC voltage is directly connected without a transformer, the water pump will be damaged!(Note: The DC brushless pump is a centrifugal pump, the pump water flow with the increase of the head decreases.No diving without self-priming function, prohibit no water free.)1.Voltage(V):12/242.Inlet/Outlet: 1/2" male thead3.Max Flow Rate(L/H):1500/2000/2600/30004.Max Water Head(M):3/5/6/85.Shaft core: Ceramic shaft6.Ambient temperature: -40~100℃7.Operating Humidity: less than 90%RH8.Liquid temperature: -40~100℃9.Using liquid: water or Nonflammable liquid with good fluidity10.Operation place: Medical, fountains and so on11.Unpitched sound: less than 45dB12.PUMP shell Material: ABS13.Motor magnet:: Ferrite magnets14.Motor enameled copper wire: QZ can resist 200C degreesNote:1.Do not take the wrong pump positive and negative.2.Prohibit not through the power converter will be connected directly to the 220V power supply pump.3.Is strictly prohibited for strong acidity, alkali and other damage to the pump medium.4.The DC brushless pump is a centrifugal pump, the pump water flow with the increase of the head decreases.No diving without self-priming function, prohibit no water freeFeatures:This DC pump uses advanced electronic components and high-quality wear-resistant shaftIt is smooth operation, high efficiency, good performance, long service life,Can be a long time continuous work, low noise, safety and environmental protection.It is widely used in industry, scientific research, aerospace industry