epoxy floor paint anti-slip wear-resistant floor paint epoxy paint coating waterproof long-lasting color retention non-cracking water-based epoxy paint floor heavy duty floor coating

Usage stepsSTEP.1Base surface treatmentClean the floating dust and stains on the base surface.Use a roller to evenly apply the primer on the ground and wait for it to dry. (This step can be omitted for tile and marble floors.)STEP.2Scrape flat the floor paintFully stir the colored sand floor paint and the curing agent, then pour it on the ground and scrape it flat (the ratio is approximately 6:1).STEP.3Finish the workFinally, use a defoaming roller to roll back and forth for defoaming treatment.It will dry in about 12 - 24 hours. It can be used after drying.Precautions1. When constructing outdoors, an outdoor interface agent needs to be applied.2. It is recommended to use an electric drill for stirring if available.3. It can come into contact with water after 24 hours, and after 72 hours when it is completely dry, forklifts can pass over it.4. The troweling operation should be completed within 15 - 20 minutes, otherwise, it will solidify in the bucket. This must be emphasized.5. If the ground is uneven, it needs to be leveled before construction, otherwise, it may result in insufficient usage.