Winding Machine Accessories Winding Machine Tensioner Magnetic Tensioner Vertical Tension 4-600g Wire Diameter 0.02-0.35mm

High-concerned chemical None. Material Cast Iron. Type Other. Origin Mainland. 1. Install the tensioner. Fix the tensioner, install the tension rod as shown in the figure and tighten the fixing screw. When tightening, the screw must be aligned with the plane of the shaft. 2. Adjust the wool loop clip. Adjust the wool loop knob on the back of the tensioner to loosen the clamping degree of the wool clamp. Turning right is tight, and turning left is loose. When using small tension, the clamping degree of the wool clamping ring should be such that the enameled wire does not fall out of the wool ring, so that it only produces a small resistance. 3. Set the output tension. According to the tension required by the user, the output tension can meet the requirements and the working angle of the tension rod is suitable by repeatedly adjusting the tension adjustment dial and the anti-tension knob. Tension and Back Tension Adjustment Instructions. 1. Tension adjustment method: Change the output te