[tianjunmaoyi] DIY Paving Brick Mould Shaped Walk Maker Reusable Concrete Path Maker Mold SteppingFor Lawn Patio Yard Garden

Plastic. Feature. 1.100 new and high quality. 2. Suitable for Path Maker Mold. 1. It is recommended to spray some waste oil on the inner surface of the mold to facilitate demoulding not too much, it will cause bubbles). 2. Pour the mixed concrete into the mould. 3. A vibrating table can be used in conjunction to vibrate the concrete and remove air bubbles. 4. Then place it on a flat ground and wait for it to solidify. It is recommended to be next to the wall to prevent the mold from being stretched. 5. During the period, you can prevent the concrete from cracking by adding some water. 6. In summer, it can be demolded in 1 to 2 days, and in winter, it can be demolded in 4 to 5 days. 7. After it is completely solidified, put the mold upside down on the wooden board, tap it a few times, and pour out the finished bricks, and you can continue to add water for maintenance. Function: This is a professional floor tile mold, which is used to pour and shape floor tiles and cement tiles, and pave