ELITA OME Carbon Seat Post Offset 5/20mm for MTB/Road Bike 25.4/27.2/30.9/31.6mm Diameter 350/400mm Length Bike Acces

elitaone Carbon Seat post HP Series offset 20mm Carbon fiber half shellClamp diameter：Ø 25.4-27.2-30.9-31.6mm Setback：20mm Clamp diameter：Ø 7 mm or 7x9 mm oval(carbon half-shells for both included) Lenghts：350 mm or 400 mm Minimum Insert：100 mm Material：Carbon Finish: Matte Screws: Titanium Seatpost maximum locking torque：5.5nm Saddle clamp tightening torque:8-12NM Max. Permissible Weight: 120 kg (265 lb)Carbon Half Shell InstallationTo install a Ø 7 mm round rail saddle: first install the Carbon Half Shell 7X7, then install the Carbon Half Shell BASETo install a Ø 7x9 mm oval carbon rail saddle: first install the Carbon Half Shell 7X9, then install the Carbon Half Shell BASEInstallation Instructions1.Seat Tube Tightening TorqueFor metal bicycle frames, tighten to 4NmFor carbon fiber frames, tighten to 4.5NmMaximum locking torque: 5.5Nm2. Saddle clamp tightening torqueRecommended tightening to 8-12Nm3.Installation WarningsEnsure that the clamp opening is offset from the frame opening during installation to avoid concentrated stress that may cause the seat post to crack.(NOTICE:For openings at both front and rear, the seat post clamp should bePre-Purchase Terms and ConditionsClause 1: Product Disclaimer*1.1 We are consistently committed to optimizing and upgrading our products. There may be slight variations in details such as 【decals】, 【color schemes】, and 【appearance styles】 between different batches. These differences are not stains or appearance flaws, do not affect product performance or normal use, and are not considered 【product quality/defects/flaws】. They are not eligible for refunds.**1.2 The texture and color displayed by carbon fiber components using bare carbon finish are typically a natural representation of the carbon fiber weaving structure. Each surface texture may vary, presenting a unique appearance. This is not a stain or appearance flaw, does not affect product performance or normal use, and is not considered 【product quality/defects/flaws】. It is not eligible for refunds.**1.3 Due to the unique nature of carbon fiber products, uneven tubing and variations in wall thickness are common and normal phenomena. The inner wall of this tube retains the original surface form created by its manufacturing process, without polishing treatment.These are not considered 【product quality/defects/flaws】, do not affect product performance or normal use, They are not eligible for refunds.**1.4 After use, products will naturally show signs of 【wear/aging/wrinkling/dents】. These are not considered 【product quality/defects/flaws】 They are not eligible for refunds.**1.5 Due to differences in color calibration, contrast, and brightness settings of display devices such as computers, mobile phones, and tablets, there may be slight color differences between the screen display and the actual product. This is an objective phenomenon caused by display device characteristics and is not a stain or appearance flaw. It is not considered 【product quality/defects/flaws】 and is not eligible for refunds.**1.6. The finish of this product is handcrafted, which may naturally include characteristics such as 【slight textures/slightscratches/slight minor pinholes】. These are inherent to the handmade process, do not affect performance or functionality.These are not considered 【product quality/defects/flaws】, do not affect product performance or normal use, They are not eligible for refunds.Clause 2: Courier Logistics and Receipt2.1 To protect your rights, please inspect the goods before signing for receipt. If the packaging is damaged, deformed, impacted, or shows signs of repeated packaging, refuse to sign for it immediately, take photos as evidence, and contact customer service to report the situation. We will assist in protecting your rights.**2.2 When unpacking after receipt, it is recommended to record a complete video as evidence. If the product is unused but damaged upon unpacking, you must provide a complete unpacking video. Otherwise, our company will not assume any responsibility.Clause 3:Limited Warranty Terms3.1. Intentional alteration/defacement/wear of the product serial number/manufacturing code will void any liability of our company.**3.2. Our company only guarantees the 【carbon fiber main body】 and assumes no responsibility for 【free gifts/promotional items/personalized accessories】 included with the order.**3.3. Unauthorized repairs or modifications of product components will void any liability of our company.**3.4. Damage caused by incorrect assembly contrary to the instructions manual will not be covered by our company.**3.5. Our company shall not be held liable for damages resulting from accidents or misuse.**3.6. Malfunctions caused by external factors, such as collisions, falls from height, improper placement, stunt performances, etc., are not covered by our company.**3.7. Damage resulting from improper cleaning operations will not be covered by our company.**3.8. Our company assumes no responsibility for bending, breakage, or other issues caused by road obstacles or potholes.**3.9. This product is intended for personal riding use only. Our company shall not be liable for malfunctions resulting from commercial rentals or other improper usage.**3.10. Damage caused by force majeure, such as natural disasters, is not covered by our company.Clause 4:Terms Take Effect4.1.Before making a purchase, users must carefully read and fully understand the entire content of this agreement.**4.2.Completing the payment and purchase shall be deemed that the user has read, understood, and accepted all terms of this agreement.*4.3.The final interpretation right resides solely with Dongguan ELITA ONE Sports Equipment Co., Ltd.