RF433Mhz Wireless Remote Control 12V ON OFF Switch Module Home Garage Door Light Switch 220V 110V 10A Breaker Wall Switch Sets

1.Controller (Receiver):Working voltage: AC85-240V 60HZ/50HZWorking frequency: 433MHZPower consumption in standby mode: Load power: Receiving sensitivity: -108dBMWorking way:wireless controlCoding way: learning codeModulation: ASKWorking temperature: -10C~+70"CSize: 47.44222.8 (mm)2.Transmitter (Remote):Operating frequency: 433MHzPower by 2 Pcs 3V CR2016 Battery (Battery included )Material: PVC;Button: 2 buttons;Size: 60mm x 30mm;Operating voltage: 3V ;Operating Current: 12mA;Transmitting power: 10mw;Modulation mode: ASK (AM).Encoding type: Learning.Transfers distance: 20~50m3.Wireless Wall Switch:Working voltage: DC3.0Vworking frequency:433MHZPower consumption in standby mode:Transmitter power: Working way: wireless controlCoding way: EV1527 learning codeModulation: ASKWorking temperature:-10"C~+70CSize: 868615mmBattery:work with 12V 27A battery(battery not included)4.ON OFF Remote Controller:Operating RF Frequency: 433MHz.Coded System: 1527 Learning Code.Working Voltage: DC 3V.Working Current: Transmitting Power: 10mW.Wireless Operating Distance: 50m(Free Space).Transmission Rate: 50 ~ 60KHz.Frequency Deviation: +0.2MHz or -0.2MHz.Color: Black.Features：1.Multi switches can control different receivers.Save energy,avoid darkness.2.Working with all kinds of Lights and Ceiling Fan.LED,CFL,Fluorescent lamp can load 300W,other can load 2500w.3.It is a 86 wall panel that can be stuck onto anywhere. It is a learning code transmitter EV1527 IC Chip. It can be learned into most of the learning code receiver.Setting way:How to get the signal：Step 1: Press the learning button(on the Receiver) twice. Wait for 3 seconds;Step 2: Press one button on the remote control. Wait for 3 seconds. Succeed.How to clear the signal：Only one step :Press the learning button(on the Receiver) 8 times. Wait for 3 seconds;Note:Wall switch itself cannot control lights on off.It needs to work with rf receiver together.Product list:There are various combinations in the options, which are convenient to use, please purchase according to actual needs.User manualHow to get the signal：Step 1: Press the learning button(on the Receiver) twice. Wait for 3 seconds;Step 2: Press one button on the remote control. Wait for 3 seconds. Succeed.How to clear the signal：Only one step :Press the learning button(on the Receiver) 8 times. Wait for 3 seconds;