TEXLABS Washing Machine Cleaning Powder🔥US TECH🔥BUY 1 FREE 1

TEXLABS Washing Machine Cleaning Powder1 Bottle 300g

Promotion:  Buy 1 Free 1Work with Front And Top Load 

Top Load: 

1. For first time usage (for washers older than 5 years and never clean before), it is recommended to use 1 bottle. Subsequently every 2 months, just use 1/3 bottle to maintain the cleanliness of the drum.
2. On the power, increase the water level to the highest level(recommend water temp to be at 40 degree celsius for best result)3. Operate the machine on a normal washing cycle for 4-5 min, then off the power.4. Leave the washing machine soak for 2~3 hours, and run a full washing cycle.Advise to Re-wash the washing machine with normal detergent after the step 4 This is to ensure to clean up the remaining dirt. FRONT Load:1) For first time usage (for washers older than 5 years and never clean before), it is recommended to use 1 bottle. Subsequently every 2 months, just use 1/3 bottle to maintain the cleanliness of the drum.

2. Empty the contents into the washing machine. Fill up water (recommended 60 deg C) to dissolve the powder. Throw in an old rag/towel.
3. Soak for 2-3 hours.
4. Set Cycle to Wash-Rinse-Spin.
5. Wrench dry the old rag/towel and use it to wipe away the leftover dirt. If the dirt is not totally washed out, set another Cycle to Wash-Rinse-Spin again.
6. Washing machine Filter Dirty Alarm LED light on.Dont worry, if u see all the dirt are in the Washing Machine. Clean it with wet tissue.