Staniot Door Window Sensor Vibration Alarm Open Door Detector 433Mhz Emergency Button Wireless Smart Tuya Security Alarm System

2 in 1 Vibration & Door Window SensorNotice:1. It needs to work with alarm panel together, can’t work alone. 1） Radio frequency：433 MHz2） Encoder IC：eV15273 Types of Triggering Methods 1.Door open alarm                       2. Vibration Detection                  3. SOS buttonDoor open triggerWhen the sensor detects separation from the magnetic strip, it sends a signal to the alarm host.Vibration triggerWhen the sensor detects vibration or window/door breakageit sends a signal to the alarm host.Suitable for all occasionsSuitable for a variety of places that need to be protected from being touched, such as vending machines, warehouses, car windows, and museums.It needs to work with alarm panel together, can’t work alone.When the glass receives an external intrusion, the alarm panel will receive the information and issue an alarm.At the same time, the mobile APP is connected to the alarm panel and can also receive information reminders.Hidden SOS button integrated with LED lightUser can add the SOS button signal to alarm panel in advance (please change the zone type to emergency zone). If they are in danger, they can press this hidden button for SOS help.ApplicationWindows, safes, glass doors, bedside table.1.Wireless signal frequency and protocol:433.92MHz/15272.Wireless transmission distance：≥100 meters outdoor in open space3.Power supply:1*3V CR2032 button battery1.The sensor not only accurately monitors vibrations or glass breakage on doors and windows, but also monitors unauthorized opeing of doors and windows. Once triggered, the sensor sends a 433MHz wireless signal to the alarm host, which then activates the alarm. It must be useed with a 433MHz alarm host or Wi-Fi gateway and cannot operate independently.2.lt supports 5 levels of vibration sensitivity adjustment,minimizing false alarms caused by irrelevant vibrations such as wind or noise.The steps to adjust the vibration sensor are as follows:1. Press and hold the setting button for 5 seconds. After the red and blue lights start flashing, release the setting button. (The number of flashes represents the current sensitivity level of the detector)2. Press the setting button again to enter the next sensitivity level. At the same time, the red and blue lights will flash a corresponding number of times to indicate the current sensitivity level. Similarly, the product supports up to 5 levels of sensitivity adjustment.Level 1: Trigger by slight vibration (default level)Level 2: Trigger by knocking, opening the window will not triggerLevel 3: Trigger by strong knocking at a long distanceLevel 4: Trigger by strong knocking at a close distanceLevel 5: Trigger by gravity knocking at a close distance