PD22.5W Mobile Power Cases Fully Transparent Power Bank Case Solderless 6/12 Cell 18650 Battery Box Mobile Power Bank Kit

Features1. Supports 22.5W output, compatible with mainstream PD fast charging protocols for rapid charging of phones, tablets, and other devices2. Features a fully transparent shell design with a high-tech aesthetic, ideal for DIY enthusiasts seeking customization3. Assembles 6 or 12 18650 batteries without soldering, lowering assembly barriers for safe and convenient use4. Supports 6-cell or 12-cell 18650 configurations, allowing users to freely select capacity for diverse endurance scenarios5. Built-in multi-protection functions ensure safety and stability during operationParameterOutput Power: 22.5WUSB Output: 5V/4.5A (VOOC) 9V/2.5A, 12V/1.87A (5V only when multiple ports output simultaneously)IN Input: 5V/2AType-C Output: 5V/3.1A, 9V/2.22A, 12V/1.67A (Output requires PD protocol support)Type-C Input: 5V/3A, 9V/2A, 12V/1.5A (Simultaneous input not supported)Additional Features: Long press to activate LED indicator; Reverse insertion won't damage the mainboardEffective Voltage Range: 3.3V-4.15V (Spring-loaded design accounts for voltage drop)Built-in protection: Input overvoltage/undervoltage protection; Integrated output overcurrent/overvoltage/short-circuit protection; Battery overcharge/over-discharge/overcurrent protection; IC over-temperature protectionNote: If proprietary phone protocols are unsupported (USB without fast charging), use PD charging (Type-C output). PD public protocol provides more stable output.Fast Charging SpecificationsWith data-enabled charging cable, successful communication handshake requires one of the following protocols:Supports BC1.2 fast chargingSupports SCP 25W Super Fast Charging output protocolSupports VOOC 22.5W Flash Charge output protocolSupports QC2.0/QC3.0 output fast charging protocolsSupports FCP, AFC input/output fast charging protocolsSupports USB C DRP protocol, enabling input/output fast chargingSupports PD2.0/3.0 protocolsSupports PD2.0/3.0 input/outputImportant Notes:1. After assembly, activate the power bank by charging it with a charger2. After activation, fully discharge the power bank first, then charge for approximately 20 hours to fully balance the battery.3. Only use flat-top 18650 batteries without protection boards. Batteries must be in good condition with undamaged positive terminals. If the positive terminal is damaged (e.g., peeling), it must be insulated. Do not use pointed-tip batteries or batteries with protection boards. Do not use any non-compliant batteries.Package includePower Bank Kit1+Accessory Pack1