Hollarm 4.3Inch WiFi Digital Video Doorbell Tuya Smart Door Peephole Camera Home Security PIR Night Vision Motion Detection

Warm tips: Please use a small power 5V1A charger, and do not use a fast charger. Main Features:● Use microwave radar to detect the alarm, as long as someone is standing in the doorway, the alarm will be triggered● 1080P HD video doorbell camera with 4.3-inch display● Built-in 5000mAh rechargeable battery and 5V 1A USB cable power supply, with low battery alarm function● When someone stays at the door, the camera will capture and record the video at the same time, you can view it in the playback (this function requires a memory card)● One-way intercom, on the cell phone users can only hear the visitor's voice, can not directly communicate with the visitor● 1080P., clear night vision. Provide day and night monitoring● PIR Motion Detection. 120° Viewing Angle, APP will push notification when peephole camera detects a person's movement● Smart Playback. If you insert a micro SD card, you can view the video recordings in "Smart Life" or "Tuya Smart" at any time.Product Specifications:●Camera Viewing Angle: 120° wide angle●Memory Card:Support up to 128Gb●Wifi Mode:802.11 b/g/n●Input:5V/1A●Applicable door thickness:35mm-115mm.●Applicable door aperture diameter:15mm-36mm.●The memory card format used for the doorbell is FAT, and the transmission rate needs to reach C10.●Certification: CE ROSH FCC●Charging interface: Type-c●Package size: 23812165mm●Charging cable length: 3m●Power: Built-in rechargeable 5000mAh lithium-ion battery.APP real-time reminder, when the battery power is less than 5%, the device will prompt the low power, APP can't link the device when the power is low.Use 3-5 times a day.Approximately 7 days of standby time.One Way TalkA guest has arrived. Open the application directly to check the situation outside the door and clearly hear the visitor's intentions. (Visitors cannot hear your voice.)2.4G WIFI Connection MonitoringRadar Microwave Human DetectionOnce someone stays at the door for a long time, radar microwave human detector starts.The app automatically pushes alarm information.When suspicious individuals are detected, immediately activate the photo capture system. And record the video (requires a memory card).Tip:If no one passes by the door, the camera is in sleep mode.The capture system does not start.Infrared Night Vision1080P HD Camera.Automatically switch to night vision mode in low light conditions. Photo/Video StorageSupport storage card storage. important Information is backed up and will not be lost.Use 3-5 times a day.Approximately 7 days of standby time.4.3Inch Display ScreenPress the button. Enjoy the large screen visual experience. Installation stepsStpep 1:Select a screws that fit the thickness of the door and insert the bolt MachineStpep 2:Pass the cable through the peephole outside the doorStpep 3:After straightening out the lines as shown in the figure;Thread the screws through hang plateStpep 4:Tighten the fixed screws in sequenceStpep 5:Buckle the doorbell wire in the correct directionStpep 6:Install the doorbell host on the hanging plateTuya 4.3inch Tuya Doorbell Camera Q&A:Q1: Why is the doorbell host unable to display images when turned on?--Inserting cable while the host is turned on cannot display images. Please insert the cable while the host is turned off; If the ribbon cable is damaged due to creases, the host will also be unable to display images. The cable of the peephole can be replaced. You can contact customer service to replace the cableQ2: What specification of charger does the doorbell host use?--The doorbell host needs to use a low-power 5V1A charger, and using a fast charger will burn out the doorbell host. The manufacturer only equipped a charging cable without a charging head. If you need a European or American standard 5V1A charging head, please contact customer serviceQ3: Why is the peephole camera unable to connect to WiFi?--Please ensure that your phone is connected to a 2.4G network. The 5G network cannot connect to the doorbell. Please enter the correct password during the connection process. When the camera scans the QR code on the phone, you need to press and hold the power button on the doorbell host to reset the doorbell and keep it waiting for WiFi connection.Q4: Why does the peephole camera disconnect from the phone?--Unstable network signals may cause them to disconnect. You can delete connection records on your phone and reset the doorbell to reconnect them.Q5:Why is the power consumption of the doorbell host very fast?--The power consumption of the doorbell host depends on the frequency of use of the doorbell host. You can lower the sensitivity of motion sensing in the tuya app to put the doorbell host in low-power mode.The radar motion sensing camera consumes batteries relatively quickly and needs to be charged approximately once a weekQ6：Why can't the camera store videos?--The doorbell needs to use a memory card with the format FAT, and its transmission rate should reach C10. If someone stays at the door for a long time, the camera will record a video and store it in the memory card. You can view it in the playback section of the tuya aap page on your phone. The camera is unable to record videos 24 hours a dayTo my dear customer:● Most of the products sold in our store have sufficient inventory, so we usually process shipments within 24 hours. If you need to purchase a large quantity of products, we will provide a discounted price● If you are satisfied with our products or services, please remember to give us a valuable five-star positive feedback. Thank you.● If you are not satisfied with our product or unable to receive your package, please contact us as soon as possible, and we will be responsible for you and your product.Thank you again! Wishing you a pleasant day^-^