56A Durm Microphone Swivel-Mount Dynamic Mic For Close Miking Equipped

Product DescriptionThe BETA 56A microphone has a frequency response specifically tailored for drums and instruments. Its extremely uniform supercardioid pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise. A built-in dynamic locking stand adapter with an integral XLR connector simplifies installation. The stand adapter keeps the microphone securely in place, even if it is struck by a drumstick. Typical BETA 56A applications include close miking of tom-toms and other percussion instruments, as well as guitar amplifiers, brass instruments, and woodwinds.Key FeaturesTailored frequency response provides drums, amplified instruments, and horns with studio quality soundBuilt-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibilityUniform supercardioid pattern for high gain-before-feedback and superior rejection of off-axis soundCompact design reduces stage clutterHardened steel mesh grille resists wear and abuseNeodymium magnet for high signal-to-noise ratio outputMinimally affected by varying load impedanceAdvanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibrationAdvanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibratioTailored frequency response provides drums, amplified instruments, and horns with studio quality soundMinimally affected by varying load impedanceUniform super cardioid pattern for high gain-before-feedback and superior rejection of off–axis soundBuilt-in stand adapter with dynamic locking system and XLR connector simplifies setup and provides greater flexibilityHardened steel mesh grille resists wear and abuseNeodymium magnet for high signal-to-noise ratio outputSpecificationsPolar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequencyOutput Level (at 1,000 Hz): Open Circuit Voltage -51 dBV/Pa (2.8 mV); (1 Pa = 94 dB SPL)Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low ZPolarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3Connector: Three-pin professional audio connector (male XLR type)Case: Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grilleAdjustable, Locking Stand Adapter: Integral, dynamic locking, adjustable through 180 degrees with standard 5/8"-27 threadWeight: 16.7 ouncesPacking list:1microphone1instruction manual