Aqara | Aqara Temperature Sensor Smart Air Pressure Humidity Environment Sensor Smart Control Zigbee Connection For Xiaomi APP Mi home

Aqara Temperature and Humidity Sensor, REQUIRES AQARA HUB, Zigbee Connection, for Remote Monitoring and Smart Home Automation, Wireless Thermometer Hygrometer, Compatible with Apple HomeKitThe Aqara temperature humidity sensor can monitor the temperature, humidity and atmospheric pressure, and can either then make changes to the environment of sending a notification to your phone via the APP. With the ability of matching with other smart devices such as gateway remote control, smart outlet, versatile controller, etc. this sensor is able to help you create a smart home. What is more, this smart sensor is easy to control the temperature and humidity change by viewing the data according to historical records.Main Features:Wireless connection: ZigBeeReal-time and historical recordsMultiple application: can connect to Aqara smart devices or other ZigBee devicesAutomatically alarm if the temperature, humidity and atmospheric pressure are abnormalDetects the temperature, humidity and atmospheric pressure conditionPowered by a CR2032 button cell ( included )Please download APP "Smart Home" from the Apple Store or Google PlayTemperature detection range: -20 - 60 Deg.C ( + / - 0.3 Deg.C )Humidity detection range: 0 - 100pct RH ( + / - 0.3pct )Atmospheric pressure detection range: 30 - 110KPa ( + / - 120PaSpecificationMaterial: ABS PlasticColor: Milk WhiteProduct weight: 0.0110 kgPackage weight: 0.0570 kgProduct size (L x W x H): 3.60 x 3.60 x 0.90 cm / 1.42 x 1.42 x 0.35 inchesPackage size (L x W x H): 7.70 x 11.00 x 2.70 cm / 3.03 x 4.33 x 1.06 inchesPackage Contents: 1 x Aqara Temperature Humidity Sensor, 1 x User ManualPlease Note:This item must match the xiaomi gateway / Aqara hub/gateway or Aqara air conditioning companion to use.How to add Aqara Temperature and Humidity sensor to gateway?First, put the Aqara temperature and humidity sensor near the gateway, open the application program, click on the device page of the gateway and select "Add sub-device", then select "Aqara Temperature and Humidity Sensor", and operate according to the prompts on the page until the gateway sounds, it indicates that the device is successfully added.What is the cause of Aqaro T/H sensor connection failure? How should I reconnect?Terrible reasons: 1. The operation is wrong, please kindly add according to the equipment,Repaint the device: 2 If the device is too far away from the service gateway, move the device closer to the gateway and add the device again.3. More than 31 sub-devices have been added to the gateway.How do I verify that the current installation location is appropriate?After the T/H sensor is connected, press the button of the T/H sensor before installation. If the voice message "Connection is normal" is heard on the multifunctional gateway. Indicates the current position is appropriate; If no, move the T/H sensor closer and try again.Why Aqara Temperature and humidity sensor often offline?1, the distance from the gateway is too far, you can try to close to the gateway - some 2, the battery is exhausted, the battery needs to be replaced.What is the function of Aqara temperature and humidity sensor button?Click to verify the connectivity between the group and the gateway, and the group will immediately report the detected temperature and humidity data to the gateway; Long press to add and reset child devices. Aqara Temperature and humidity sensor can be directly connected to the mobile phone?The T/H sensor cannot be directly connected. Therefore, connect the gateway to the mobile phone, and then connect the T/H sensor to the gateway. Akala temperature and humidity sensor suitable for use in what environment?Suitable for indoor use, the normal operating temperature is -20°C~+50°C, humidity is 0~100%RH, no condensation How accurate is the temperature and humidity sensor in Akala?Temperature accuracy +0.3*C, humidity accuracy +3%, air pressure accuracy +120 Pa Akala temperature and humidity sensor reminder mechanism is how?When the temperature and humidity sensor detects that the current environment is not within the comfort range, it will send a push reminder to the mobile phone. This function can be turned off at the app end. Akala temperature and humidity sensor can link what equipment?Temperature and humidity sensors can be linked to other Aqara smart devices. For example: when the temperature is higher than the set temperature, the intelligent socket is linked to open the electric fan; When the humidity is lower than the set humidity, connect the smart socket to open the humidifier. What is the maximum response distance from the temperature and humidity sensor to the gateway? Can you walk through the wall?The indoor response distance is about 10 meters (including through the wall distance), and the outdoor response distance is about 65 meters. If the Wi-Fi network is down, will the sensor and gateway still be able to respond?1. The sensor can still be triggered. After being triggered, the sensor will perform corresponding functions according to the Settings of the previous application program. 2. When the network is disconnected, APP cannot be used for control or response, and basic local functions can work. Why does the connection between the gateway and Aqara temperature and humidity sensor sometimes work and sometimes does not work when the connection is normal?Ensure that the distance between the gateway and the T/H sensor is within the valid range of 10 m. If this occurs, install the T/H sensor closer to the gateway. How to replace the battery of Aqara Temperature and Humidity sensor?Method 1:1. Tear part of the back glue, paste the product on the desktop, rotate the product body about 10 degrees counterclockwise, loose can open the battery cover; 2. Place the new CR 2032 battery in the battery slot. Note that the positive and negative electrodes of the battery face up. 3. Align the raised cylinder on the battery cover with the oval hole at the bottom of the sensor, and turn the cylinder clockwise to close the battery cover. Method 2:1. Insert a coin into the battery cover recess. Turn the battery cover about 10 degrees counterclockwise, and open the battery cover if it becomes loose. Do not overrotate the battery cover to avoid damage; 2. Place the new CR 2032 battery in the battery slot. Note that the positive and negative electrodes of the battery face up. 3. Align the raised column on the battery cover with the oval hole at the bottom of the sensor, and turn the column clockwise to close the battery cover.