Smart Air Vent Ambient Light System Blind Spot Monitoring BSD System for Tesla New Y Juniper Model 3 Highland Model YL 3 Y 2021+

Smart Air Vent Ambient Light System Blind Spot Monitoring BSD System for Tesla New Y Juniper Model YL Model 3 Highland Model 3 Y 2021+Notice Before Buy to Avoid any Copy:1.Please choose correct option according to your car.Power connector for Model YJuniper is different.Power connector for Model 3 2020 Only is different.2. For BSD air-vent light, Model YL is totally same as Model Y Juniper. So can choose Model Y Juniper option if can't find Model YL. 3.Car E-commerce Store has one and only one model, which can support to make setting via Wechat MiniProgram.(Other companies copy our products and call the ver1 and ver2, which are not from us). However, if you don't need to change the settings, you don't need to go into the WeChat mini program. We have already set it up in advance. 4.Please pay attention to protecting the light strip during installation and do not fold or bend it.Option:For Model 3 Y 21-24: for Model 3 2021-2023 and for Model Y 2021-2025（Not Y Juniper),This version have 3M adhesive tape. For Model Y Juniper: for New Model Y Juniper,This version have 3M adhesive tape. For Model 3 Highland: for Model 3 Highland,This version have 3M adhesive tape. For Model 3 2020 only : or Model 3 2020 only,This version have 3M adhesive tape.Installation Instructions：One-Touch Light Bar Mode CustomizationPersonalize your driving display in seconds.Simply press and hold the right scroll wheel for 3 seconds to switch between light bar modes.·Refreshed Model: Experience a sleeker look with an auto-shortened light bar (by 5 cm).·Model 3/Y (2020-2024): When switched to the new mode, the left bar stops showing blind spots. To get it back: shift into Park, hold the right scroll wheel for 3 seconds.Notice：Precautions during installation and use：1.If the left turn light/right turn light does not light up, please press and hold the right scroll button for 3 seconds in P gear to switch modes and use it normally.(If you accidentally press the right scroll wheel while in P gear, causing the BSD ambient light to switch to the Model 3 Highland or New Model Y Juniper mode, there will be no blind spots displayed on the left or right side because the light bar of the new car is slightly longer than that of the old Model 3 and Model Y. You only need to press and hold the right wheel of the steering wheel for 3 seconds while in P gear to switch modes and restore the light strip to normal.)2.If you find that the light is not on or cannot be started, please check if the plug is plugged in properly and if the light strip interface is connected properly.Note：Explanation for BSD Ambient Light Inspection, Judgment and Handling:1. Post-installation Inspection and Judgment:First, confirm if the light strip can turn on normally.Check if the door opening and turning prompts on both sides work normally.If the above are all okay, then the product itself is okay.If the light strip does not work after installation, check if the socket is properly plugged in and if the original vehicle power supply is turned on.During transportation, both the light strip or harness may be damaged, or improper installation can cause damage.2.Post-use Tips:If one side of the left and right light strips does not work during use,long press the wheel for 3 seconds to switch modes and solve the problem.3.The mini program function has been pre-set, so you don't need to set it up after receiving the product.4.If you accidentally touch the steering wheel buttons or scroll wheel during installation, it will change the color and sport mode of the ambient light.(You only need to press and hold the right wheel of the steering wheel for 3 seconds while in P gear to switch modes and restore the light strip to normal.)Connect the ambient light strip toSocket #1 (indicated by the purplecircle).Installation instruction video and Real Display Video on the Road：Product Features: 1. Application: Designed for all Tesla Model Y and Model 3, New Model 3 Highland and New Model Y Juniper; 2. Innovative Design: 2-in 1 Blind Spot Monitoring System and Air-vent Ambient Light System, perfectly Fit for Car OEM Style. 3. Multiple Reminders: Blind Spot Reminder Turning Light Reminder Sport Light Over Speed Reminder Door Open Reminder AP Status Reminder Battery Pre-heating Reminder Fast Charging Reminder 4. Air-vent Ambient light colors can be synchronized with the original car ambient light (Model 3 Highland and New Y Juniper), can also choose color manually: When vehicle is parked(speed =0 at P gear), press the scroll up to switch the color between white/orange/green/purple/pink/blue. 5. Non-destructive Installation：Plug OBD CAN connector, and ambient light strip at air-vent on dash, no need to cut any wire;Specifications:Suitable for Tesla Model 3 Y 2021+AMD, Model 3 Highland, New Y JuniperPackage List:Main Host ---x1Harness ---x1Installation Video Guide ---x1