Moving Sand Art Picture Round Glass Quicksand 3D Sandscape In Motion Display Flowing Sand Frame Sand Painting Christmas Gifts

Product instructionsWith changes in temperature and pressure, sometimes you may need to adjust the air and water inside the quicksand painting. The packaging of the soap flowing sand painting is equipped with an air conditioner. The specific operation is that the flowing sand art is a natural balance of water, sand, and air. The air should be at a height of approximately 5mm, and the sand will reach a relatively good flow rate.Quicksand falling too fast: add some airUsing the same method as above, concentrate the air in any corner with pores and determine the movement of sand.2. Insert the air conditioner into the air hole.Quicksand falling too slowly: extract some air1. Each circular quicksand art painting has a hole that concentrates air into any corner of the hole and waits for the sand to move away.2. Insert the air conditioner into the air hole.If many small bubbles in the quicksand painting turn into a particularly large bubble, a little water can be filled at this time to supplement the evaporation of water.1. Be sure to use pure water or boiled water for cooling;2. Select a vent, wait for the sand to move away, extract some air, and empty the air conditioner tube 3. Then use the air conditioner to pump in and fill in too much water to prevent excessive pressure and breakage of the slope glass.