Dentek Temparin Max Advanced Repair Kit (13+ repairs)

Video instructions :https://youtu.be/aAc-lzjG5A8?si=t87O6Aq7YomjO-j6Temparin® Max Advanced Repair Kit is designed to repair broken teeth, crowns, loose fillings and temporary fillings with the same ingredients dentists use. This is a temporary remedy meant to relieve pain and replace a lost filling, temporary filling, cap, crown or inlay until you have a chance to visit your dentist.Once placed, Temparin® Max should only be removed by a dental professional. Visit your dentist within 48 hours of use.Available in 2.64g (13+ repairs).Directions to replace a lost filling: Wash the cavity area with warm water and do not dry. Cut with spade tool or pinch a small amount of Temparin® Max from the vial, and roll into a ball between fingers. Slightly overfill the cavity with Temparin® Max and pack into place with the no-mess applicator tool tip. Close your teeth together, as if you were biting down on a piece of paper, and gently chew or grind on the replaced filling a couple times to create a comfortable bite. Use a moist cotton swab to remove excess Temparin® Max from around the area. Moisture will accelerate the set. Temparin® Max will set softly in your mouth within a few minutes, but avoid chewing on the repair for 2-3 hours to allow the material to fully set.Directions to secure loose crowns, caps, or inlays: Try the crown, cap, or inlay first to see if you can fit it accurately back onto the tooth surface. If you are not able to do so, or if the remaining tooth is cracked, then do not proceed further. If the crown has a post attached to it or if there is tooth surface remaining inside the crown, Temparin® Max may not stick. Carefully rinse the tooth area and the inside of the crown, cap, or inlay with warm water, and do not dry. Cut with spade tool or pinch a small amount of Temparin® Max from the vial, roll into a ball between fingers, and place evenly inside the crown, cap, or inlay. Place the crown, cap, or inlay on the tooth and bite down, applying pressure to push into position. Temparin® Max will begin to harden within a few minutes, but avoid chewing on the repair for at least 2-3 hours to allow the material to set. Use a toothbrush to gently clear any excess material from around the crown, cap, or inlay.