NOVOFERM RF WIFI Bridge Tuya App Remote Control for NOVOTRON TORMATIC MCHS43-2 MTR43-2 Garage Gate Door USB Type-c power supply

DescriptionsIt combines Rf and TUYA mobile app control, After the device paired with the network, you can realize the remote control of your gate through the tuya mobile app. You can connect the voice audio to realize voice control of your gate. you also can share the control of the device to other people and you can remove the control of other people. This smart device eliminates the complicated receiver wiring and allows you to conveniently, quickly, and securely realize the remote control of your gate by mobile app/smart speaker/RF controlHighlight【APP Remote Control】After the equipment has been distributed to the network,You can check the working state of the device in Tuya APP anywhere and anytime.【RF Control】It can be used as an RF remote to control your garage gate door【Voice Control】You could voice control the device by Alexa/Google Assistant.【Recommended installation】After powering up the device, there is no need for complicated wiring to enable your mobile phone to control your front door【Share function】You can share garage door control with your family, or friends, and you can remove other people's garage door control.Compatible withNOVOFERM MCHS43-2NOVOFERM MTR43-2NOVOFERM MNHS433-02NOVOFERM MNHS433-04NOVOFERM NOVOTRON 502 MAX43-2NOVOFERM NOVOTRON 504 MAX43-4NOVOFERM NOVOTRON 512 MIX 43-2NOVOFERM MINI-NOVOTRON 522NOVOFERM MINI-NOVOTRON 524NOVOFERM MINI-NOVOTRON 522 DesignNOVOFERM MINI-NOVOTRON 524 DesignAccess to receiver required. Please make sure you got access to your receiver/opener before purchase.How to UseEnergise the equipment.USB Type-C 5V1. Open the casing of your receiver. It is located next to your motor.2. On the receiver circuit board, press the programming button and let it go (ENR, MEMO, PROG, REC according to the model) The LED light on the receiver illuminates or blinks.3. Press a button on your new remote control for 1 second.4. Let the button go. The LED light on the receiver turns off immediately or in the following 10 seconds according to the model.After successful programming, you can connect the device to the app for mobile phone controlChecklist before using the deviceYour smart phone or tablet has connected to a2.4g WiFi with internet.You need to enable Bluetooth of the phone.You have the correct WiFi PWD.You have the correct WiFi PWD.You smart phone or tablet must have access to APP store,Google play.Your router is MAC-openUser Guide1.You can download the App by searching “Tuya Smart”in mobile app stores or scanning the following QR code.2.Register an Tuya Smart account.3.If you have Tuya Smart account. just log in.4.Start pairingReset the device first:if the network indicator(red light) blinking fast(0.5S/time） , skip the reset step.①Power on②hold down the Reset button for 10 seconds.until network indicator(red light) blinking fast(0.5s/time).③Clicking in the top right corner on tuya smart app.then click“Auto scan" ,wait a few seconds, After the devices are found,click "Next"④Select a 2.4GHz Wi-Fi network and enter your password.⑤Name your device.⑥Start controlling your device with your mobile phone.Specification:Product material: ABSProduct weight: 50 gProduct color: WhiteApp: Tuya / Smart lifeRated voltage: USB Type-c 5VFor: Such as electric telescopic door remote control, road gate remote control, alarm remote control and so on.Frequency:433MHzSize:885920mm