2PCS Garage Door Opener Controller RSC 2 RSE 2 433MHz Remote Control Comaptible With Liftronic 500 700 800

Description:1. Type of programming: Programming with the receiver2. Number of channels: 23. Code: Rolling code4. Frequency: 433.92MHz5. Battery: Include BatteryUses: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control productsCompatible with:Remote Control Model：RSC2-433RSE2-433Receiver Model：Liftronic 500Liftronic 700Liftronic 800Portronic D5000Portronic D2500Portronic S4000Access to receiver required. Please make sure you got access to your receiver/opener before purchase.Why choose me?latest versionFeaturesWhen your original remote control is lost or damaged, you can buy our remote control and pair it with your receiver, after the remote control programming is successful, you will get new remote controlInclude:* Remote Control* Battery* English ManualHow to ProgramYou have to press a button on the receiver (under the motor cover or next to the motor in a separate box), and then press a button on the new remote to register it. Materials required for programming: your receiver!1. Open your receiver from the garage door.2. Press the programming button. Inscription is usually: ENR, MEMO or PROG.3. On some receivers, it is necessary to hold down the programming button.4. On the receiver the LED indicates the start of the programming mode.5. Press for one second on a button on the new remote control and let it go again.6. The LED of the receiver will light differently or goes out to indicate a successful programming.7. Wait a few seconds to exit the programming mode. Congratulations! Your new remote control is programmed!