1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V DC-DC Boost Conversion Module

During transportation, the inductor may collide slightly, but this does not affect its useShipping list: 1 mini ultra small boost conversion moduleFunctional parameters:3.3V output version:Input voltage 0.8-3.V; output voltage 3.3V; output current: 500mAStarting voltage 0.8V, output current 10MA, input 1-1.5V, output 3.3V50-110MA; Input 1.5-2V, output 3.3V110-160MA Input 2-3V, output 3.3V160-400MA;5V output version:Input voltage 0.9-5V; output voltage 5V; output current: 480mAhStarting voltage 0.8V, output current 7mA, input 1-1.5V, output 5V40-100MA; Input 1.5-2V, output 5V100-150MA; Input 2-3V, output 5V150-380MA; Input over 3V, output 5V380-480MA;DC-DC boost conversion module, operating frequency 150KHZ, typical conversion efficiency 85% pin spacing 2.54MMSize: 11mmx10.5mmx7.5mm (very small) Weight: Approximately I grams (very light)This is a voltage boost conversion module, and the following conditions must be followed when using it:The input voltage cannot exceed the nominal voltage, otherwise it will burn out the moduleThe input power must be greater than the output power, otherwise the output voltage will be less than the nominal voltageThe output load cannot exceed the nominal load, otherwise the output voltage will be lower than the nominal voltage