Regaton Car Air Pump Compressor 12V 150PSI Electric Wireless Portable Tire Inflator Pump For Motorcycle Bicycle Car Tyre Ball

Warm tips:After receiving the goods, if the display does not light, may be the warehouse to put a long time battery power to finish, please charge the battery first 3-4h, and then use, this situation is normal, please do not worry!Power-on method: Press and hold the power button for 3 seconds+Specification:Power: 100WAir pressure range: 3~150psiFunction: inflatable / pressure measurement / lighting / automatic charging and stopping / five inflatable modesTrachea length: 15cmGas flow: 30L/minMaterial: ABS+electronic componentsProduct size: 139.56cm  0.5kgApplicable: car/motorcycle/bike/ball/inflatable toysVoltage: 7.4VBattery capacity: 3600mah batteriesCharging time: 3-4hBattery life: 15-25 minutesPackage Included:1* Rechargeable Wireless Car Air Pump3* Gas nozzle1* Air Tube1* USB charging cable1* User ManualInstructions:1.Connect one end of the air pipe with the air pump and srew the other end into the tire valve inside. For any French valve inside, it is necessary to add an adapter.2.For the intelligent-control air pump displayed on the LCD, you need to press thebutton to activate the power supply and set the air pressure on the LCD screen, and it will automatically shut down after 60 seconds.3.Press the  key repeatedly to switch freely among PSI, BAR, KPA, KG/CM2.4"+"and"-"are the pressure preset keys,short press for slow adjustment, long press for fast adjustment, set to the appropriate pressure value.flash for 5 seconds, after automatic setting is completed, press the air pump power switch to start inflate5.When pumping to the set value,the intelligent-control air pump will automatically stop pumping."Press the"SOS"switch for SOS emergency rescue and LED.6. After the inflation is completed,pay attention to the temperature of the trachea and then quickly unscrew one end of the trachea from the valve core and the other end from the main unit.The charging time of the air pump is 3-5 hoursLithium battery charging1.Plug the USB charger into the USB end, then connect to the USB charger port on the air pump.2.When theflashes on the air pump.it means the battery is chargingIt takes 3-5 hours to fully charge