LDNIO | LDNIO Tower Multi Tap Real-time Power LED Display Cube Power Strip Timer Outlet with 45W Fast Charging Stations UK US EU Plug 2M

TOWER EXTENSION POWER SOCKET4 UNIVERSAL OUTLETS45W Max USB OUTPUTReal-time power/energy/voltage monitoring8-layer digital protection clear at a glance①Display KWH in real time after power-on ②Total power output display in real time③Input voltage shown in real time④Digital protection:Normal light on abnormal light off⑤Surge protection:Normal light on/abnormal light off⑥Grounding protection:Normal light on/abnormal light off⑦Timing function⑧Overcurrent protectionNOTE:1.Anti-surge protection If the indicator light is off, it means that a large peak current has been intercepted and the protection is invalid. The protection can only be restored after maintenance2. Digital protection: To facilitate checking the current power status before use, the device will self-check after power on, the indicator light will always be on, and the socket power supply can be turned on and off by the master switch.3.Power display: The power displayed on the screen is the real-time input power of the device, not the ideal maximum value The charging power depends on the protocols supported by the device and fluctuates under the influence of the real-time power level of the device. It is normal to have a difference with the maximum value marked in the power allocation table.4.Energy measurement displays in 1 kWh increments. Readings below 1 kWh show as O; values above 1 kWh display as whole numbers. The counter resets after reaching 9999 kWh5.The LED digital display will be on as soon as it is powered on. If it is not used for a long time, it is recommended to unplug the power supply to avoid self-consumption of electricity.24-hour timer switchPress and hold the button for 2-3 seconds to enter the 24-hour timer function. Pressing the button again can set the power to be turned off within 1-24 hours, and the LED display screen shows the time setting.