12V 24V 220W Cigarette Lighter Female Socket Car High Power Pure Copper Battery with Clip Car Socket Plug

modname=ckeditor



 How to use the overcurrent hitch cord
 When the car is used for a long time for lighting and multimedia entertainment system, or when it is not used for a long time, the battery is easy to be drained, resulting in starting difficulties. At this time, it is necessary to use the wire for starting as follows:
   1. Connect one end of the red wire to the positive terminal of the battery of the trams, and pay attention to lift the protective sleeve of the positive terminal.
   2. Connect the other end of the red wire to the positive terminal of the battery of the tram. Be careful to avoid touching the metal of the body or the negative terminal of the battery to prevent short circuit.
   3. Connect one end of the black wire to the negative battery terminal of the trolleybus. 4.
   4. Connect the other end of the black wire to the negative battery terminal of the tram or to the metal part of the frame or foot.
   5. Start the tram and keep it idling for a period of time to recharge the lossy tram.
   6. Turn off all electrical equipment on the tram, then turn the key to start it normally and keep it idling for a certain period of time.
   7. After normal operation, remove the hitch wires in the reverse order in which they were hitched.
   Precautions:
   1. Connect the positive terminal first when starting and then the negative terminal when finishing.
   2. Connect the positive terminal to the positive pole and the negative terminal to the negative pole.
   Translated with DeepL.com (free version)