5.8G HDMI Wireless Extender 50M 4K HDMI Video Audio Transmitter and Receiver Kit Wireless Display Dongle Adapter For TV Monitor

5.8G HDMI Wireless Extender 50M 4K HDMI Video Audio Transmitter and Receiver Kit Wireless Display Dongle Adapter For TV Monitor PCNoted:1.The model Max 1 transmitter to 2 Receiver2,The description is only for full set(TX RX),But the link of option have 2 option ,one is RX(Only Receiver),other is full set(Transmitter+Receiver),please kindly select before shoppingTransmission Distance:1.Outdoor open space 50m2.Indoor passage without wall 40m3.Through a wall 10-20meters4.The above distance is for reference only, because of the site,environment,interference,wall andother factors,lt has a great impact on the wireless transmission effect,and the actual distance can be transmitted in useFeature:1.This Nsendato of wireless HDMl extender consists of a transmitter and receiver (Full Set)2.Supports multiple resolutions,including 480i/576 to 3840x2160@30hz.3.Support 5.8G single frequency,fast transmission speed,strong anti-interference ability.4.The external antenna supports long-distance transmission with maximum air expansion environment to 50 meters(pay attention to ambient interference).5.Plug and play,the computer does not need to install drivers.Specification:HDMI-Compatible:HDMIV1.4Compressed Format:H.265Maximum Pixelclock:250MHzMaximum Data Rate:10GbpsResolution:Max 3840x2160P@30HZConnector:HDMI-AWifi Gain:13dbmWireless Standards:802.11 AC signalSignal Direction:unidirectionalRadio Frequency:5.8GTransmission Distance:50MPower:DC 5V A1Transmitter Max 5W1 Receiver Max 5WPairing MethodNote:Before the product is shipped from the factory, it has been paired,there is no need to re-pair it, if it does not work properly,check the transmission and receiver blue light status,when the blue light is not flashing,may be the device USB power supply is insufficient,please switch to mobile phone If the blue light is not blinking,it may be that the USB power supply of the device is insufficient,please switch to the mobile phone charger for power supply,first supply power to the device and then connect HDMI.If the blue light still does no blink, then re-pair the device, the pairing method is asfollowsOne-to-one pairing operation1.Plug the transmitter and receiver into the power supply,at this time the light keeps on for 15 seconds then Off.Wait for the light to tum on again before you can operate.Long press the Pair button on the transmitter and receiver for 5 seconds,then release the Pair button ,at this time the blue light on the transmitter and receiver blinks quickly,the device is in the pairing state .2.The blue light on the transmitter and receiver changes from fast to slow binking,indicating that the pairing is successful and the device can be used nomallyOne to two receiver pairing1.One-to-one pairing2.Repeat the steps of one-to-one pairing (i.e.keep the transmitter unchanged and replace only the receiver).3.Support up to one pair of twoPackage(Full Set-TX RX)TransmitterReceiverAntennaType c CableHDMI-Compatible adapterManual