Compatible With ProLift RSC2 RSE2 Garage Remote Control 43392Mhz Transmitter Rolling Code Gate Door Opener

Remote control RSC2, RSE2 compatible remote control 433,92Mhz transmitter rolling code 433 MHZ garage door opener100% Compatible Model:RSC2RSE2ProliftPls kindly note,we only sell the replacement remote,not the original oneDescription:1. Type of programming: Programming with the receiver2. Number of channels: 2/43. Code: rolling code4. Frequency: 433.92MHz5. Battery: 12V 27A With batteryUses: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control productsFeature:1. Free Battery2. Free Coding Instructions3. Free Keychain4. Heavy Duty Design5. In-built Battery6. Button ProtectorHow to use our remote control1. Press the LEARN button or the transparent button located under the motor. The LED light on the motor blinks slowly. Let the button go. 2. During the next 10 seconds, press a desired button on your new remote control. 3. The LED light on the motor blinks faster. Let the button go. 4. Press the same button again on your new remote control. Keep it pressed down. 5. The LED light on the motor blinks very fast. Let the button go. 6. Your new remote control is programmed. ATTENTION : You can program only 6 RSE2 remote controls with the motor To erase all your remote controls: 1. Press the transparent button P located under the motor. Keep it pressed down. 2. Wait 5 seconds. Let the button go. 3. The LED light on the receiver blinks slowly for 1 second, then faster for 4 seconds and then very fast for 2 seconds. 4. All the remote controls are erased. Compatible with the following garage door operator models: Liftronic 500, 700, 800 and Portronic D5000, S4000, D2500