1080P 4Ch WiFi Dashcam car camera Driving DVR Front Left Right Rear Night Vision 3Lens 24h Parking Loop Recording Hardwire kit

Note：The dashcam's built-in battery is designed to save date, time and settings. The battery capacity is small and cannot be recharged! Please keep the car charger connected during daily use!Please always use the original car charger included in the box ! ! !Mobile phone chargers or USB cables are not supported by the dashcam as they may cause the rear/cabin camera to not activate, or the dashcam to not start, etc.Please note: There are two models available—a three-channel option and a four-channel option.Three-channel: Front and left/right side dash cams (no rear camera)Four-channel: Front, rear, and left/right dash camsRear Camera is an optional accessory and not included as standard. If you need Rear Camera, please select the configuration option that includes it. Product images will indicate whether Rear Camera is included.Please check carefully before purchasing. Thank you.1080P Car Dvr 3/4 Lens Dash Cam for Cars WIFI Front Inside Camera Recorder Video Camera for Vehicle Black Box4-channel Driving Camera1080P FHD DVR camera is composed of a front lens, a left lens, a right lens, and an rear lens to cover as many aspossible directions when you drive.Night VisionThe cabincamera has an F1.8 aperture and 8 infrared lights.In addition to producing incredibly clearrecordings, its image performance will be farsuperior to that of other driving recorders at night.Theycan capture stunning images even in pitch-blackspaces at night.WiFi-APP ControlThe device can be connected to the WIFI hotspot ofthe mobile phone.lt is convenient for the functionoperation and scren preview of the equipment.At the same time,it is easy to upload and share keyvideos to the memory of the phone.About WIFI Connection:Before connecting to the DVR on the phone, it is necessary to install the WIFI connection app "Viidure APP" in advance.You can search for "Viidure" installation in the Google App Market.Steps:(1) In standby mode, long press the "M" key to enter the DVR menu and enter the WIFl setting menu;(2)In the wifi menu of the DVR, check to obtain the wifi name and password;(3)Open the "Viidure" APP on your phone, enter the configuration mode, turn on the wifi function of the phone, follow the prompts to find the wifi signal of the DVR and enter the password to connect;(4)After successful configuration, you can connect and operate the DVR through the "Viidure" APP.Loop Recording & G-SensorAutomaticallyoverwrite the past videos when the memory cardis full. G-sensor will be activated when there is acollision to lock the key video you need andprevent it from being overwritten.24-hour parking monitor-hardwire (optional)（If you need the 24 hour parking monitoring function, you can order the hardwire accessories）Waiting 24 hours a day (to ensure that the car itself has electricity). When the car is started, it is recorded normally. After the car is turned off, if it is hit or vibrated, the machine will immediately wake up to record and keep the video as evidence. Don't worry about the situation that the car is turned off and you can't record the video.Reversing Assist FunctionIf the kit you ordered includes a rearview camera and you need to implement the reversing assist function, you need to connect the red signal wire of the rearview camera to the car's reversing light (the light will come on when reversing). If you don't need the reverse assist function, just disconnect the red signal wire and leave it unconnected.Installation Diagram1.Secure the recorder to the windshield of the vehicle , recommended near the rearview mirror area2.Hide the power cord in the window gap3.Insert the car charge wire into the cigarette lighter, connect the power supply, and complete the installation4.Rear camera if you need reverse camera function please connect the red wire, the red wire connects to the power supply of the reverse light behind the car.5.All car recorders need to be connected to the power supply to use, please understand the small battery safety design of the recorder. The battery of electrical appliances in the car is not allowed to be installed too large.About Formatting The Memory Card:When installing a memory card for the first time, be sure to format the memory card. After formatting, can correctly match the memory card.Formatting Steps: After installing the memory card, Press and hold the “M” button to enter the menu, find the format option, and click to format the memory card.(Important: Formatting the memory card on the computer is an incorrect operation. Please be sure to format the memory card on the menu option.)