Fishing Reel Knob Side Cover Replacement for For DAIWA For LT For ALPHAS Models Metal Gray 185 by 111 Millimeters

Features:Applicable Models:21 FOR FUEGO for LT,25 FOR FUEGO CS,FOR REGAL for LT,24 FOR REGAL CS,FOR REVROS for LT,21 FOR LEGALIS for LT,FOR LUVIAS for LT,21 FOR RCALDIA for LT,FOR CROSSFIRE for LT,FOR ICHIGEKI for LT,FOR EXCELER for LT,22 FOR EXIST for LT,22 FOR SALAMANDURA for LT,FOR PROREXV for LT,21 FOR FREAMS for LT,FOR AGGREST for LT,20 FOR ALPHAS AIR,21 FOR ALPHAS SV,22 FOR ALPHAS SV,25 FOR ALPHAS BF,FOR ALPHAS AIR TW,FOR TATULA SV TW for JP103,FOR TATULA for CT 100,FOR ZILLION SV TW for JP.(Suitable for DAIWA spinnings wheels, purchased according to size) Non original fishing wheel accessoriesPlease customer service of the specific model of the matching wheel when placing an order to avoid purchasing the wrong oneReason for loss of grip cap: The original new grip cap has defects, and the grip cap clip does not tightly grip the cap. The aging of the grip pill causes the gap between the holes for installing the grip pill cover to become larger and looseresolvent:Apply double-sided tape to the side of the grip cover, only sticking to the FOR surface in contact with the grip. If one layer is not enough, apply two layers. After installation, the gap is tight and has for force.Seal it directly with 502 glue.Rub 502 glue onto the edge of the pill cap, dry it thoroughly before installation, and try multiple times Try. The glue will form a frictional solid layer on the side of the grip cap After installation, the gap is tight and comes with friction.Specification:Material:Metal.Color:gray.QTY:1pc.Size:18.511.1mm.Weight:2g.Product Name:fishing reel partsPackage Content:1Knob side cover.Note:1 The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.2. Please allow slight manual measurement deviation for the data.