Wireless Switch RF433 Module Remote Control Light Switch 1/2/3 Gang Wall Switch for Light Bulb Chandelier 10A 110V 220V

Specification:controller (Receiver)Working voltage: AC85-240V 60HZ/50HZ Working frequency: 433MHZPower consumption in standby mode: Load power: Receiving sensitivity: -108dBMWorking way:wireless controlCoding way: learning codeModulation: ASKWorking temperature: -10C~+70"C Size: 47.44222.8 (mm)Wireless Wall SwitchWorking voltage: DC3.0Vworking frequency:433MHZPower consumption in standby mode:Transmitter power: Working way: wireless controlCoding way: EV1527 learning code Modulation: ASKWorking temperature:-10"C~+70CSize: 8686 15mmWorking principle of RF433 circuit breaker:1. Press the learning button (433 circuit breaker) once, then press the remote control button that comes with it again, and the indicator light will flash twice (learning switch).2. Press the learning button (433 circuit breaker) twice in a row, and then press the button on the remote control that needs to be equipped. The indicator light will flash twice (learning on).3. Press the learning button (433 circuit breaker) three times in a row, and then press the remote control button to be equipped. The indicator light will flash twice (learning off).4. Press the learning button (433 circuit breaker) continuously for 6 times, and the light will flash 3 times (power on start function), and it will default to the on state when powered on.5. Press the learning button (433 circuit breaker) continuously for 7 times, and the light will flash 3 times (the function will not be activated when powered on).6. Press and hold the learning button (433 circuit breaker) for more than 5 seconds, the indicator light will flash twice (cancel all remote control codes).