LOOLIFL | Threadlocker 243 Thread Locking Compound Anaerobic Adhesive Sealant Medium Strength Anti-Loosening Anti-Rust Oil-Resistant High Temperature Resistant Removable Universal Type

Description:Name: thread locking agentHot melt adhesive type: metalPacking specification: 10ml-50ml-250mlFeatures:1. low strength universal type, easy to disassemble2. removable oil resistant, medium strength, universal type3. for inert metals, high-strength general-purpose type, suitable for difficult-to-disassemble inert metals, with a certain degree of oil resistance.4. simple design, convenient and applicable5. safe ingredients, do not hurt the skin.Usage:1. the bonding surface must be clean and free of any contaminants such as dirt, oil lubricants and rust.2. when removing the product from a refrigerated environment, bring the adhesive to a low room temperature before use.3. keep away from children and use in a ventilated area.4. please wear gloves when using. if glue splashes on the skin, soak it in warm soapy water and peel off the adhesive stuck on the skin. remember not to use a knife for peeling. if splashed in the eyes, rinse immediately with water and go to the hospital for examination.Points for attention:1. this product is not suitable for use in pure oxygen or oxygen-rich environments, and cannot be used as a sealing material for chlorine gas or other strong oxidizing substances.2. this product is not suitable for use on plastics, especially thermoplastic materials that may cause stress cracking.3. apply an appropriate amount of glue, as surface overflow can affect internal curing. if there is any overflow, it is recommended to reapply the glue.4. this product works better with a thin adhesive layer below 0.05mm. for oversized threads, a larger gap can affect the curing speed and strength of the product.