Mr.Hobby MS-231/ MS232 Professional Mark Decal Softener Setter with Glue for Model Hobby Kits Decal Solution

Product Name: Water Sticker SoftenerCategory: Model Making MaterialsSpecification: 40ml per bottleUsage: For softening water stickers on clay dolls, military, mecha, vehicle and ship models, etc.Usage Instructions:First, shake the product thoroughly. After shaking, it becomes a milky white liquid. On the painted surface of the model, use the brush provided in the bottle to apply some sticker softener. Do not apply too much; just one application is sufficient. Applying too much or not cleaning in time may cause corrosion of the topcoat. Then, move the soaked water stickers to the desired position, which is the position where the softener has been applied. Use tweezers to adjust the position of the sticker properly. Then, use a cotton swab to remove the excess softener below. Afterwards, apply the softener again to the already attached sticker and use a cotton swab to remove the excess softener again. Some people may notice that the surface of the sticker is not flat or wrinkled. This is because the sticker has been treated with the softener. It's normal and won't be a problem if the wrinkles are not too severe. Once the softener dries and wrinkles, the folds will naturally flatten out. Another phenomenon is that the sticker feels very wrinkled. This is because the sticker was not attached properly. It's okay for a short period of time. Dip your finger in some water and apply it to the sticker's position. Then, re-soak the sticker with water. This can help adjust the sticker's position. However, the movement should be gentle. If the sticker dries out and is on the model surface, it won't work. The remaining cases need to be practiced more.