diymore | MPPT Solar Charge Controller 30A 60A 100A with Load/Dual USB /LCD 12V 24V Auto Solar Panel Charger Regulator

Features:1. Intelligent SOC algorithm control precisely matches the battery’s state of charge to extend battery life2. MPPT high-efficiency tracking technology with 12V/24V auto-adaptation enhances solar conversion efficiency3. Industrial-grade main control chip with multiple circuit protections (overcurrent, short circuit, reverse connection, etc.) ensures safety and reliability4. Real-time LCD display showing current, battery level, and light control status, making charging and discharging data easy to read5. Wide range of applications, suitable for solar power generation, residential solar lights, and solar street lightsParameter:Product Name: MPPT Solar ControllerSystem Voltage: 12/24V (auto-adaptive)Rated Current: 30A/60A/100A (Optional)PV Voltage Range: 15–23V solar panels for 12V batteries; 30–46V solar panels for 24V batteriesLight-Sensitive On Threshold: 8V (with delay)Light-Sensitive Off Threshold: 8V (with delay)USB Output: 2 USB ports, 5V 2A (max)Standby Current: <10mAOperating Temperature: -35°C to 60°CProtection Features: Built-in overcurrent, short-circuit, open-circuit, and reverse connection protectionSupported Battery Types: Lead-acid, lithium, and lithium iron phosphate batteriesApplications: Supports a wide range of batteries and operating environments, including solar power systems, smart home devices, solar chargers, solar light boxes, solar billboards, and solar warning lightsSafety Guidelines:1. This controller is set by default to automatically detect 12V or 24V batteries. During initial installation, be sure to connect the battery first and ensure it has sufficient voltage so that the controller can correctly identify the battery type.2. Install the controller as close to the battery as possible to avoid voltage drops caused by excessively long wires, which could affect accurate voltage detection.3. This controller is compatible with various battery types [including open-top, sealed, and lead-acid batteries]. If charging lithium batteries, you must be thoroughly familiar with their characteristics; after connecting the battery, you must configure the charging parameters before use.4. Battery Type Description: b1 is for lead-acid batteries (12V/24V auto-detection); B2 is for lithium-ion batteries (3-cell 11.1V lithium-ion battery); B3 is for lithium iron phosphate batteries (4-cell 12.8V). The factory default setting is B1.5. This controller must only be powered by solar panels for charging. Do not use DC or other power sources for charging.6. This controller generates heat during operation. Please ensure it is installed on a flat, well-ventilated surface.Package include:Solar controller x1