MiJia | Mijia Portable Air Pump 2D LED Multi-tool Mini Pump for Automotive Car Bike Type-C Inflator Electric Air Compressor

New Mijia Electric Air Compressor 2D Mini Inflator Tire Pump for Car Motorcycles Bike Ball Tyre Digital Inflatable PumpParameters:Battery Type: Lithium Ion BatteryWorking Temperature: -10°C-45°CStorage Temperature: -10°C-45°CWorking Noise: Noise level less than 80dB(A) at 1 meterCharging Interface: Type-CSensor Accuracy: ±1psiProduct Size: Approximately 123x75.5x45.8mm (Naked Machine Size, Excluding Hose)High-pressure Hose Size: Hose length when pulled out is 200mm (including American nozzle interface, excluding thread)Net Weight of Product: Approximately 490gInflatable Pressure: 0.2-10.3bar/3-150psiCharging Temperature: 5°C~40°CRated Capacity: 2000mAh (14.4Wh)Rated Input: 5VCharging Time: Approx. 3 hoursCompliance Standards: Q/310107QW007Valve Adapter Size (Inner Diameter): American Valve Adapter6.9mm Presta Valve Adapter: 6mmQuick-connect Valve Adapter: 6.9mmPackage Included:Mijia Portable Electric Air Compressor 2DThe 2nd generation of the air-filling little monster with upgraded swiftness.Pre-set pressure stops automatically when the desired pressure is reached.Digital tire pressure detection.Inflating pressure can reach up to 150psi.A new generation of air pump with better performance.Compared with the Mijia Air Pump 1S, this pump has optimized details and improved internal structure. It inflates 25% faster to create a more convenient and efficient air-filling experience. It speeds up by approximately 25% to help you get out of trouble quickly.With a high-power magnetic motor, it can fill up one empty tire in just 8 minutes*. The inflation is more powerful. Inflation speed increased by approximately 25%.Battery life improvement. It can inflate up to 10 tires when fully charged.Hardware configuration upgraded, energy efficiency improved. It can continuously inflate up to 10 tires* when fully charged, and fill two empty tires* continuously. It meets daily vehicle maintenance needs. Inflation speed increased by approximately 25%.High-precision cylinder body can reach up to 150psi.The air pump adopts a 19mm high-precision alloy casting cylinder body, and the inflation pressure can reach up to 150psi. It takes only 86 seconds* to fill a high-pressure bicycle tire.Pre-set pressure stops automatically and accurately displays real-time tire pressure.Set the desired air pressure value or select the preset mode, one-button inflation, and inflation will automatically stop when it's complete. You don't need to watch over it, and it's effortless and convenient. The air pressure sensor uses a digital chip, and the tire pressure detection accuracy can reach 1psi*.6 preset inflation modes make it easy for beginners to operate.Switch between 6 modes, and the default air pressure range is limited to avoid over-inflation. The free mode can memorize the pressure value, set it once, and bid farewell to complex settings.Adds quick connector conversion head for quick and clean installation.The newly added quick connector conversion head allows for easy and fast installation of the nozzle. With a wide variety of accessories, it can adapt to more inflation scenes.Built-in lithium battery allows for free inflation anytime and anywhere.The built-in 2000mAh high-rate lithium battery provides ample power. Without an external power supply, you can say goodbye to cable constraints.Lightweight, Portable, Easy to StoreWeighing only about 490g*, the simple and compact design of the inflator makes it easy to carry around while on the go. Whether you need to store it in your backpack, car, or at home, its small and sleek design won't take up much space.Accurate Real-time Tire Pressure Display with Automatic StopSet your desired pressure value or select a preset mode, and the inflator will do the rest. Once the inflation is complete, it will automatically stop without any need for supervision, making it effortless and worry-free. The digital sensor chip used in the inflator ensures precise tire pressure detection with an accuracy of up to 1psi*.The inflator precisely displays the remaining battery power with a four-grid indicator.*At full charge, this product can inflate a 205/55 R16 car tire from 0 to 2.5 bar in approximately 8 minutes at an ambient temperature of 25°C±2°C.*At full charge, this product can inflate up to 10 205/55 R16 car tires from 2.0 to 2.5 bar in approximately 2 minutes per tire at an ambient temperature of 25°C±2°C.*At full charge, this product can inflate at least 2 205/55 R16 car tires from 0 to 2.5 bar at an ambient temperature of 25°C±2°C.*Inflation from 0psi to an average of 120psi for a 700c road bike tire takes approximately 86 seconds at an ambient temperature of 25°C±2°C.*The tire pressure detection accuracy of the Mi Home Inflator 1 is ±2psi, while the Mi Home Inflator 2 has been upgraded to ±1psi.*The weight of the Mi Home Inflator 2 does not include the weight of the French nozzle conversion head, air needle, quick connect nozzle conversion head, or storage bag, and is approximately 490g.*The Mi Home Inflator 2 does not come with a Type-C charging cable and power adapter, which users need to purchase separately.*All data on this page, unless otherwise specified, is sourced from external laboratories. Due to environmental differences, actual usage may vary slightly.