ANENG | ANENG CM83 Clamp Multimeter 4000 Counts AC/DC Current Voltage Capacitance NCV Detection CAT III Electric Maintenance Tool

ANENG CM83 Digital Clamp Meter 4000 Count Multimeter 1000A AC DC Current Voltage Capacitance DC/AC Voltmeter NCV Sense Ohmmeter Tester ToolsDescription:This instrument performs AC/DC voltage, AC Current, Resistance, Audible Continuity, Diode,temperature measurements etc..lt is a 3 3/4 digits,4000 counts auto ranging digital clamp multimeter.It has the functions of polarity indication, data hold,over range indication,auto power-off,electric torch,NCV,and True-RMS,measurement.This digital clamp multimeter has been designed according to EN61010-1 oncoming electronic measuring instruments with an over voltage category(CAT III 600V) and Pollution degree 2.Specification:FunctionRangeResolutionAccuracyAC current0A-1000A10mA-1A±(3.5% reading+10 words)AC voltage400mV-600V0.1mV-1V±(1.5% reading+10 words)DC voltage400mV-600V0.1mV-1V±(1% reading+10 words)Capacitance4nF/40nF/400nF/4μF/40μF/400μF/4mF±(5.0% reading+10 words)Resistance0Ω-20MΩ0.1Ω-10KΩ±(1.5% reading+10 words)Hz0Hz-4MHz0.1HZ-1KHZ±(2% reading+15 words)NCV detection√Automatic shutdown15. lf there is no operation,shut downDiode√Battery modelAAA battery*2(without shipment)Buzzer√Flashlight lighting√Weight188gH data retention√Maximum Count4000 CountsLCD backlight screen√Material qualityABSLow battery warning√Package Include: (Batteries without shipment)According to the chioceUsage Precautions:1. Do not touch the probes directly with your hands to avoid electric shock and ensure personal safety during testing.2. Before use, inspect the test probes to ensure there is no damaged insulation or exposed metal.3. Do not use the current and voltage ranges interchangeably to prevent damage to the instrument.4. It is best to remove the batteries when not in use for a long time to prevent battery corrosion of other internal components of the instrument.5. If you do not know the magnitude of the voltage or current to be measured, start with the highest range and then select the appropriate range based on the measured value.