20A EWeLink WiFi Smart Socket Wireless Remote Control Compatible with Alexa Voice Control EWeLink App for Smart Home Automation

✅✅APP connection:1. Turn on Bluetooth and 2.4G on your phone wifi2. Press and hold the socket button for more than 5 seconds, the indicator light will flash quickly twice and remain on once to enter the distribution mode,3. Open the app, click on the bottom, select "Bluetooth network distribution", click "Next", and the app will automatically scan for devices.4. Click on the scanned device, and then select the device connected to the phone WiFi Confirm that the relevant information is correct, click 'Save', and wait for the device to be connected.5. The device has been successfully added. You can modify the device name and click 'Add Complete'.✅✅If the indicator light flashes slowly, you need to select compatibility mode to connect to the APP。Alternatively, press and hold the socket button until the indicator light flashes twice and stops once, release it, and then connect to the app✅ ✅The remote control needs to be paired with the socket as follows:✅Remote control control, no WiFi required, it is RF2.4G control.✅2.4G remote Off line pairing:When in non pairing mode, quickly and continuously press the button 2 times on the socket, At this time, the indicator light flashes twice and stops once.，the socket will enter pairing mode. At this time, press the switch remote control once, and if the socket is controlled, pairing is successful; (If pairing is not successful, please repeat the above operation)✅Attention: If the indicator light flashes slowly or rapidly, it indicates that the pairing has entered invalid pairing mode and cannot be successfully paired. You need to clear the pairing code of the socket and then perform the pairing operation again. （The indicator light must flash twice and stop once before pairing can be successful）✅Clear pairing:When in non pairing mode, continuously press the button on the socket 8 times (within 5 seconds) to turn off the indicator light and clear the successful pairing.✅Product parameters:✅Wifi smart socket parameters：Working voltage: AC100~250V, 50/60HzMaximum current: 20ARemote control frequency: 2.4GHzsupport App: eWeLink APPTerminal platform: Android/IOSWifi: IEEE802.11 b/g/n 2.4GSocket size: 50x50x84mm✅Remote control parameters:RF frequency: 2.4GHzSize: 118 x 40 x 10mmModel of battery used: 2 AAA battery (Battery included)The "All ON" button can open 4 sockets with one click, and the "All OFF" buttoncan close 4 sockets with one click✅Matching method of remote control and socket:1 remote control+1 socket1 remote control+2 sockets1 remote control+3 sockets1 remote control+4 sockets2 remote controls+1 socket3 remote controls+1 socket4 remote controls+1 socket1 socket can be paired with up to 5 numeric buttons✅Functional characteristics1. APP control: Control the device on/off by controlling the socket switch through the eWeLink app on the mobile phone2. Support Google Home, Alexa speaker voice control3. Timing countdown function: Set timing, countdown, and work schedule for socket devices through mobile app4. Sharing function: Share devices with family through the appNote: Without metering function5. Remote control (only serves the purpose of powering off and on, for example: cannot adjust the wind speed and shaking state of the fan)Can be paired with wireless switches with a frequency of 2.4G in this store (please consult customer service for specific models)(Note: This remote control and socket cannot be confirmed whether it can be paired with sockets or remote controls from other stores)RF433 frequency not supported